I have a Schiit Saga S preamp which sits in a closet in my room with the rest of my sources.
The problem is with the closet door closed (blocks the noise of the PC and the noise of the relays in the preamp clicking) I cannot see what input on the preamp I have selected or whether the active mode is on or whether mute is on.
I use an IR extender for the remote.
That got me to thinking. Is there something I can put in front of each LED that will drive LEDs on a board mounted right outside the closet door?
The problem is with the closet door closed (blocks the noise of the PC and the noise of the relays in the preamp clicking) I cannot see what input on the preamp I have selected or whether the active mode is on or whether mute is on.
I use an IR extender for the remote.
That got me to thinking. Is there something I can put in front of each LED that will drive LEDs on a board mounted right outside the closet door?
There is a light I can turn on.
Whatever I use will need to be able to be stuck to the front using double sided tape.
Whatever I use will need to be able to be stuck to the front using double sided tape.
I hadn't thought about that. Maybe I can figure a way to attach some toslink cables to right in front of the LEDs and run them out above the door.
Would be nice, however I don't want to modify the door. Plus I'd not be able to see it from where I normally sit.