Hi everyone,
I am in a process to recap a tone board of my Marantz 2275.
I need 4 low leakage 3.3uf and I can't find anymore Nichicon UKL for that.
Any suggestion for an equivalent replacement, I prefer to stick with electrolytic polarised one versus Wima Mks2.
Thank you
I am in a process to recap a tone board of my Marantz 2275.
I need 4 low leakage 3.3uf and I can't find anymore Nichicon UKL for that.
Any suggestion for an equivalent replacement, I prefer to stick with electrolytic polarised one versus Wima Mks2.
Thank you
Doesn't appear to be anything exotic, just general purpose. 50v, 2000hrs@85 degrees. Here's a digikey sub: https://www.digikey.ca/en/products/detail/nichicon/UPJ1H3R3MDD1TD/3129391
jeff
Lead spacing is 2mm, so it should fit with no problem. The old tantalums appear to be much wider spacing.
Thank you for your help, parts are ordered from mouser.com
These where not available from mouser canada, so problem solved
These where not available from mouser canada, so problem solved
Before inserting the new parts, form the leads so they line up with the holes.
The board was designed for an electrolytic type, with a larger footprint and wider lead spacing than the tantalums.
The board was designed for an electrolytic type, with a larger footprint and wider lead spacing than the tantalums.