Canton Ergo sub seeking schematic

[e_fortier]

Hi

My good friend has an old Canton Ergo sub which plays odd click while in standby mode.

One resistor seems to have overheated and one extremity was cut.(R23 near the big filtering capacitor)

Please have a look at the pics of the PCB, looking for the schematic in order to probably replace the burned resistor.

Thanks for your help
Eric

 

[e_fortier]

Anyone ?

Thanks
Eric

 

[BP1Fanatic]

Why do you need a schematic to replace a burned resistor? If you can see it, then unsolder the old one and install a new one.

 

[e_fortier]

I need the schematic to find out the resistor value and also figure out where that noise is coming from.
You have the schematic?

TIA

 

[BP1Fanatic]

No. Why you foolin', I have multiple car audio amps I need repaired. I tried to fix 1 and failed. I think I bought the wrong resistor. The color bands are so vague that you can easily mistake 1 color for another.

It's the white amp on the table. All the other amps you see in the picture needs repaired.

 

[BP1Fanatic]

I take that back, the other Profile California amp in the back and the 2 Rockford Fosgate Punch 45's undeneath work.

The Fultron Competition, Autotek BTS 7600, and the Power Acoustik Fire & Ice F12X-1600 need to be repaired.

 

[e_fortier]

Hi
Would someone have the schematic?

Thanks
Eric

 

[lung]

Hi,
some suggestions.

There are many subwoofer sold like Ergo Sub 650 or Ergo AS 650 and a lot of others they build in the past.
Please what is the Model?
Or you may write with this information to Canton service@canton.de.
They are very kind.

PS. I have no schematic.

 

[e_fortier]

Thanks lung,
My friend called Canton and they were able to tell him the missing information.

 

[Nakrul]

I have the same problem with Canton Ergo As 2 subwoofer as friend of e_fortier. Andre from Canton after-sale service said that i need pay 200 euro for new amplifier, in my letter from 13 august, i try to explain Andre my financial situation, that i can't buy new audiodevices, thats why i by Canton 122DC from 90's and need to repair sub from 00's. Now after a week of waiting I'm confident that Canton do not provide me this information. I hope e_fortier can help me with this.

 

[e_fortier]

Hi

I just sent you a PM but now I see you have a different resistor issue.
Try writing to Canton technical support instead of their after sales service people.

Eric

 

[Nakrul]

I see you have a different resistor issue.

Can you explain what issue do you mean?

 

[e_fortier]

My friend R23 was burned, in your case is seems to be another resistor