Good morning to all and especially to those who can help me. I am now going to build the cross-over 6-24; I would like to use it for a cut on the low ways at 100 Hz and the high ways from 100 up to start what values of C do you recommend? (and C/2 possibly?).
Thank you all
Thank you all
The article on the crossover shows an ideal 1KHz crossover at 24 db/oct.
All you have to do it use filter capacitor values at 10 times shown in the schematic.
All you have to do it use filter capacitor values at 10 times shown in the schematic.
You'll find it here. https://passdiy.tv/apps/passxo/
Use the 6-24 thread in the PASS DIY section of the forum for more info or questions.
Use the 6-24 thread in the PASS DIY section of the forum for more info or questions.