For Sale Xono Clone Phono Stage & Power Supply

[finwbu]

I have for sale a Pass DIY XONO Phono clone that has high quality components such as Dale resistors, Roederstein capacitors, WIMA RIAA, Panasonic and ELNA Electrolytic capacitors and Toshiba and IRF semiconductors. The two 10uf capacitors at the signal output are from WIMA. There is a trimmer on the board with which you can trim the offset in front of the 10uf Wima to a minimum value of approx. 5mV, and remove the WIMAs.

Including two power supply boards each have two channel, and the two transformers with 2 x 30V / 0.8A made by FG Electronic are of very high quality.The power transformers primarily only support 230 V AC operation.
The second green power supply board is also included in my offer, they are designed by meldano ( DiYaudio). A PDF document with the necessary circuit diagrams and layouts will be provided. I am only selling the Xono because I have owned a Xono version with 4 inputs for some time.

The price does not include PayPal and shipping costs. PayPal is accepted, registered mail order company pays the additional 5% PayPal fees. With PayPal Friend, the 5% does not apply and can be sent with or without tracking, the shipping costs within the EU are approx. 24€, I will transfer any overpayment for the shipping back.

But the Boards must be well packing! Shipping within Germany 12 € Outside the EU, it may vary depending on the country. If you are interested send me a pm.

Offers are welcome!

 

[marceljs]

The price does not include PayPal and shipping costs.

What is the price? Also, do the power-transformer support dual primaries for 115v/230v AC operation?

Thanks!

 

[finwbu]

The power transformers primarily only support 230 V AC operation.

 

[rif]

what would the total cost be, without the transformers, to the US? does it have balanced (xlr) outputs?

 

[finwbu]

Rif the output is balanced. Unfortunately I can't send you a message.

 

[Algar_emi]

Nice kit. The Xono is single a single ended circuit, with a phase splitter at the output to produce the balanced output… it can be seen on the picture, we see the Phase splitter section And the dual big red caps, probably the output coupling caps.