Very nicely built Hypnotise MC phono preamp. AD811an and OP1765g op amps. Carbon Film resistors. Wima RIAA. ACS polypro output caps. Millspec 24ga Teflon/Silver output wire, 317/337 regulators w/ outboard transformer.
This a great sounding MC phono preamp. Less than 20hrs use.
Asking $250.00 obo plus shipping.
This a great sounding MC phono preamp. Less than 20hrs use.
Asking $250.00 obo plus shipping.
Hi it is users Hynotoad, but designed to be used with AD797 at the front end. Why did you change as that op-amp is the cornerstone of the design.
Also sound great with Bursons V6.s in the 2nd stage.
Cheers
Also sound great with Bursons V6.s in the 2nd stage.
Cheers
Yes but this design was specifically designed for the AD797. I would suggest people would more likely buy with the correct op-amp. Just buy a couple of Chinese $5-00 ones
Cheers
Cheers
It has sockets, so anyone can install what they prefer. I'm not sure a Chinese copy would sound as good as a real AD797 or the AD811 that's installed.
I get that you like the hypnodoad a lot...It's ok for anyone to have prefferences.Yes but this design was specifically designed for the AD797. I would suggest people would more likely buy with the correct op-amp. Just buy a couple of Chinese $5-00 ones
Cheers
AD811 is a very, very good and RARE opamp nowadays . It's higher noise is completely irrelevant with mc cartridges.Being an obsolete IC it's more valuable than one being still in production.
What's not ok is using 200k ohm carbon resistors instead of metal ones ...
AD811 is current production and appropriate for new designs according to ADI. Could you be confusing AD811 with AD846?
I built it just to listen to, since people liked it so much. I actually prefer my fet/tube phono stage better. I would install AD797 if someone wants them and pays full asking price,
OK with a MC the AD797 is super, with a MM the AD811 works better. I think a MM overloads the AD797. You pick which IC and price.
Hello Cygnus x1
I am interested as my old phono stage refuses to work. What about $175.- incl. shipping costs to my German Address?
Will need only the Hypno and PS boards, no casing, so shipment should be cheaper and more convenient to arrange for you.
Regards, Leo
I am interested as my old phono stage refuses to work. What about $175.- incl. shipping costs to my German Address?
Will need only the Hypno and PS boards, no casing, so shipment should be cheaper and more convenient to arrange for you.
Regards, Leo