24.576 mhz clock

[fabrice63]

Hi all ,

I need to replace an MCO1510A in my upsampling board ( msb link 3 dac ) , they are unavailable

trouble is the output must be 5.0 v and not 3.3 v as we find today

any help is appreciated 😉


.

 

[Lampie519]

VCXO

 

[fabrice63]

I did not find any at 5.0v , they all seems to be 3.3 v

.

 

[simon7000]

Digikey

Blocked

In stock $2.08

Link works for me! But just in case lose the ""s.

"https://www.digikey.com/en/products/detail/abracon-llc/ACO-24-576MHZ-EK/675405?s=N4IgjCBcpgbFoDGUBmBDANgZwKYBoQB7KAbRAE5YAOcgdhAF0CAHAFyhAGVWAnASwB2AcxABfAgCZa8aCGSR02fEVIgJAFnJhaEJiDYdu-YWIJhyNBHNSZcBYpDIAGRi3aQuvQSPFqwAVhdZeUU7FUc1dQA6f2kAAgBZAAkAL1d9dxAAVQE%2BVgB5FAScNCwAVx4cUzUAZhqqKxDbZQcyOsDyFz0DDyNvMV8JVUIsRD4MDDRWQh5GUSA"

 

[Lampie519]

I did not find any at 5.0v , they all seems to be 3.3 v

.

From his website :

Contact
Please contact me at info@tentlabs.com for a dedicated approach for the upgrade of your CD player.

The link to DigiKey works for me as well...

 

[fabrice63]

Thank you guys , I finally found and order this part at Mouser , it is an good replacement part

I have to say that I previously bought an Vanguard TCXO on eBay , and the result are very poor , far from the advertised numbers 😕 , well 15 Bucks for a part , what would I expect !!!!



.

 

[Lampie519]

Let's hope this one will perfom better !

 

[fabrice63]

It wont perform any better , it will do the job as the old 1510 A 😉

I am not able to say , if an TCXO at 0.1 ppm will do better , I tried an I failed

I am open of every good source what so ever


.

 

[Lampie519]

Build your own...
https://www.by-rutgers.nl/rutgerS-Clock.html

 

[fabrice63]

Looks nice , but digital stuff is out of my diy possibilities , I am looking for an easier way


.