Tang Band W5-2143 5" Paper Cone Full Range Driver

[norman bates]

Wow Kurt, I’ve seen over the years your great comments on the w5.

 

[Wiggle8]

Here is my interpretation of going FAST with W5-2143. 🙂

Kurt

Very nice.

I think I have decided on my build:

W5-2143 in small sealed wall-mount box (only about 250 cubic inches).

LD-22 ambience tweeter HP at 3kHz up-firing (can tinker with this frequency and add some delay to reduce phase issues).

Low profile subwoofer behind sofa, thinking a Dayton LS10, crossed over to W5 at approximately 100 Hz. Will EQ the W5 low end a little or just use a lower order crossover on the W5.

 

[doug01n]

Very nice.

I think I have decided on my build:

W5-2143 in small sealed wall-mount box (only about 250 cubic inches).

LD-22 ambience tweeter HP at 3kHz up-firing (can tinker with this frequency and add some delay to reduce phase issues).

Low profile subwoofer behind sofa, thinking a Dayton LS10, crossed over to W5 at approximately 100 Hz. Will EQ the W5 low end a little or just use a lower order crossover on the W5.

Update on the project? I'm considering a W5-2143 for my stereo. 🙂

 

[kissabout2002]

I am very happy with my W5-2143 on Tabaq Large enclosure, I recently add an external tweeter for beaming problem.....all the best to everybody

 

[hm]

here the Kornet XL double horn feedback after the Mini Posaune http://www.hm-moreart.de/132.htm

 

[xrk971]

Really a unique horn design there @hm . What is used for the rear driver and what is the bass extension in Hz at -6dB ?

 

[hm]

Really a unique horn design there @hm . What is used for the rear driver and what is the bass extension in Hz at -6dB ?

its a feedback from Kanada, he took a no name, look my HP Kornet, Mini Posaune, Posaune, Posaune XL from 3",4-5",6,5",8"