NOT eBay ! I am living in Asia - not North America!
Who can recommend a very good CHINESE (mainland) kit supplier?
Not tubes
-pre-amp
-mixer
-power amp class d/e/f/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z
-speakers
-linear PSU
-etc
If you want to dump on Chinese stuff - go elsewhere
Who can recommend a very good CHINESE (mainland) kit supplier?
Not tubes
-pre-amp
-mixer
-power amp class d/e/f/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z
-speakers
-linear PSU
-etc
If you want to dump on Chinese stuff - go elsewhere
Good and Chinese don't compute !
Most Chinese stuff is cheap/fake copies.
And often poor copies.
I would be looking for a reputable dealer elsewhere.
If you want to dump on Chinese stuff - go elsewhere
3e-audio,
Sure electronics have good amps line. Both are Chinese company.
Excellent !!! THANK YOU!
I've been looking at speakers on Taobao for several years (addicted to Taobao window shopping) and for value for money you cannot beat these guys : PAIYON/?? ??hifi??????????Peerless??????-???
I have a couple of pairs (those I linked to plus their most expensive ones) and couldn't be happier. Incidentally you're just up the road from me, Suzhou is one of the places I'd like to visit.
I have a couple of pairs (those I linked to plus their most expensive ones) and couldn't be happier. Incidentally you're just up the road from me, Suzhou is one of the places I'd like to visit.
IIncidentally you're just up the road from me, Suzhou is one of the places I'd like to visit.
I am near Lucena, Quezon Province, Philippines now.
Suzhou is WORTH 2 to 3 days visit!
You say "kits". "Kits" traditionally means "solder yourself". Such is rapidly reduced in choice because SMD components take over and SMD components are difficult to hand-solder. "Kits" may include assembled boards where you combine boards with different functionality yourself. Of such, there is an enormous choice from PRC. Finally, you have the completed audio products from PRC but I assume those to be outside your interests.
My impression of the Chinese DIY market, which I appreciate a lot, if you understand what you buy:
There is a huge number of OEM manufacturers selling through an enormous amount of trading companies. Often, the trading companies add their own brand to the product such that you do not know who is actually the manufacturer. These trading companies often know little about the technical characteristics of their products because they sell a very diverse range of products. Now to Nigel's (posting #2; one of our most experienced members) valid point - if you have problems with the technical performance, the seller can in most cases not help you out and the way to the manufacturer/designer is often long and difficult. Trading sites like AliExpress do very well in ensuring you get the product but how to make electronics work correctly is not their specialty either.
In practice, you need to know about electronics yourself and can use this forum as support. With the price level, this situation is not unacceptable but different from the situation previously known in GB, EU and US. Brands like Wellemann, Conrad and many more designed and sold their kits under their own name and offered service themselves in case of problems. This is no longer so with many cheap products sold on the Internet from China. This is why the prices are much lower.
With the footer of your postings, I get the impression that you have commercial intends and are not just looking for a system for yourself.
Most manufacturers in China appear not to have a full range of audio products such as it was common in EU/GB/US in the past. They have some products, perhaps some power amplifiers or a few speakers, which they produce and sell in huge quantities to the trading companies. This means, you have to pick of the different audio elements from different traders being supplied from different manufacturers. Few have a more complete product range unless you talk about finished audio products.
Go to AliExpress and search for "TPA3116", "LM3886" or "speaker" and you will notice the trading structure. Check the product range of some of the traders. Often, you will find the same product from 5-30 different traders at rather different prices. The real manufacturer?
Good luck on an enormous market with a huge potential but requiring quite an effort from you.
My impression of the Chinese DIY market, which I appreciate a lot, if you understand what you buy:
There is a huge number of OEM manufacturers selling through an enormous amount of trading companies. Often, the trading companies add their own brand to the product such that you do not know who is actually the manufacturer. These trading companies often know little about the technical characteristics of their products because they sell a very diverse range of products. Now to Nigel's (posting #2; one of our most experienced members) valid point - if you have problems with the technical performance, the seller can in most cases not help you out and the way to the manufacturer/designer is often long and difficult. Trading sites like AliExpress do very well in ensuring you get the product but how to make electronics work correctly is not their specialty either.
In practice, you need to know about electronics yourself and can use this forum as support. With the price level, this situation is not unacceptable but different from the situation previously known in GB, EU and US. Brands like Wellemann, Conrad and many more designed and sold their kits under their own name and offered service themselves in case of problems. This is no longer so with many cheap products sold on the Internet from China. This is why the prices are much lower.
With the footer of your postings, I get the impression that you have commercial intends and are not just looking for a system for yourself.
Most manufacturers in China appear not to have a full range of audio products such as it was common in EU/GB/US in the past. They have some products, perhaps some power amplifiers or a few speakers, which they produce and sell in huge quantities to the trading companies. This means, you have to pick of the different audio elements from different traders being supplied from different manufacturers. Few have a more complete product range unless you talk about finished audio products.
Go to AliExpress and search for "TPA3116", "LM3886" or "speaker" and you will notice the trading structure. Check the product range of some of the traders. Often, you will find the same product from 5-30 different traders at rather different prices. The real manufacturer?
Good luck on an enormous market with a huge potential but requiring quite an effort from you.
Last edited:
You say "kits"..............
Good luck on an enormous market with a huge potential .....
After 10+ years in China and being closely associated with the electronics factories and B2B & B2C websites I kinda know all that, but thx.
Member
Joined 2009
Paid Member
Bare pcb's are good due to low price and willingness to take small orders. These could be the basis of a good kit, many suppliers. As for components, I wouldn't trust any of them unless you have the ability to visit the supplier for yourself or else be prepared for fakes and other rip offs.
Member
Joined 2009
Paid Member
After 10+ years in China and being closely associated with the electronics factories and B2B & B2C websites I kinda know all that, but thx.
wow, kind of snarky given that you came here looking for free advice that you can profit from.
Bare pcb's are good due to low price and willingness to take small orders. As for components, I wouldn't trust any of them unless you have the ability to visit the supplier for yourself or else be prepared for fakes and other rip offs.
Yep. I know. Was in SZ for 3 years and China for 10
wow, kind of snarky given that you came here looking for free advice that you can profit from.
BIG assumption on your part.
You do not have to participate in this thread.
POSITIVE comments are welcome.
AND I CAN assist.....will be in SZ 2019.02
Don't be scared by SMD, all it needs is a fine tip soldering iron and good vision. Some guys even flood the devices with solder and then use solder mop to mop up the excess.
A good pair of smd tweezers as well.
Work in the middle of a large clear area so you can catch the smd components as they fly everywhere ! It happens quite a bit with my shaky old hands.
Don't be scared by SMD, all it needs is a fine tip soldering iron and good vision. Some guys even flood the devices with solder and then use solder mop to mop up the excess.
Isnt heat stress an issue?
Re-working in most factories is done with conventional (DIP) tools - scares the )(&)!&% out of me
If you want to dump on Chinese stuff - go elsewhere
I don't need to dump on it, it dumps on itself.
Too many stolen designs reproduced badly with cheap/fake devices.
The last Chinese transistor I bought lasted 10 minutes !
I turned off my soldering iron and the transistors blew.
A small glitch on the mains was all it took.
So next time I bought genuine parts and despite trying very hard I couldn't blow them up.
Seems like the Chinese parts had a very low breakdown voltage and died at the first sign of a problem.
I bought 4 flash drives from China on ebay.
After 2 months they hadnt arrived so I got refunded.
After 3 months they did arrive but none worked !
Bought Bluetooth dongle from China, fell apart on second use.
Need I say more ?
Last edited:
I don't need to dump on it, it dumps on itself.
Too many stolen designs reproduced badly with cheap/fake devices.
Oh dear. I guess literacy rates over there have fallen sharply. I thought I had made it very clear - no Hyde Park antics/rants/preaching.
Oh dear. I guess literacy rates over there have fallen sharply. I thought I had made it very clear - no Hyde Park antics/rants/preaching.
Well when its your forum you can make the rules !
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Class D
- Chinese stereo kits - recommendations? NOT eBay!