Are there tweeters from SEAS or Vifa/Peerless as replacement available to the above mentioned model ?
This tweeter was the cheap version of the OW1 from Hiquphon - I think also without ferrofluid.
Thank you for advices.
This tweeter was the cheap version of the OW1 from Hiquphon - I think also without ferrofluid.
Thank you for advices.
Schematic Linn Helix here
This is a good replacement - a cheap and good tweeter without ferrofluid:
SB19ST-C000-4 :: SB Acoustics
new screw holes for mounting are necessary.
Schematic of the crossover network from Linn LS-150 HELIX you will find in the attachment:
This is a good replacement - a cheap and good tweeter without ferrofluid:
SB19ST-C000-4 :: SB Acoustics
new screw holes for mounting are necessary.
Schematic of the crossover network from Linn LS-150 HELIX you will find in the attachment:
Attachments
Last edited:
I kindly disagree, the propose tweeter has 4 ohms, when the Linn's one has 6 ohms, then at least some disbalance btw tweeter and woofer sound levela can occur
- Status
- Not open for further replies.