Can we have the traces in some kind of format with each layer separate for us poor homebrewers?
i know. i'm waiting for the new outbut boards.
but i am wondering if i just gonna cut the boards i have.
it is time to start building soon🙂
but i am wondering if i just gonna cut the boards i have.
it is time to start building soon🙂
Exactly! I'm also waiting the parts from Buzzforb's gb. Currently trying to decide on ps/transformer and enclosure. Have you decided yet?
I hope they release gerbers for the boards, or a pdf with separate layers....
I hope they release gerbers for the boards, or a pdf with separate layers....
yes i have🙂 6x33.000uF CRC supply and 2x32V 600VA transformer pr monoblock.
chassis i will build my self. with 2x 10.080" profil pr side from heatsinkUSA🙂
i allready got the sinks and caps.
chassis i will build my self. with 2x 10.080" profil pr side from heatsinkUSA🙂
i allready got the sinks and caps.
The GB parts are ready with the exception of the Fukushima resistors and Nichicon Caps. THe Fukushima should be here in about 2 weeks. NIchicon have me worried. If they get here at same time as Fukushima, then all will be ready just in time to go with fets.
good news buzz!
So, the only thing left to wait are the toshiba fets. do we have any word from them?
So, the only thing left to wait are the toshiba fets. do we have any word from them?
Awesome, it is nice when a plan comes together! Thanks Buzzforb and others to make this happen.
GB's rock!
GB's rock!
I guess Toecutter just got tired of all the advice. On the other hand I know he is a really busy guy so maybe he just had to stop DIY'ing for a while.
Too bad as I thought we had a real nice set of boards. Haven't heard a word from him and I've tried to contact him.
Since there were some that didn't have confidence in the PSU boards I suggested we just start with the 3 amp boards, but again, no response.
All I need are the files to send them in.
Mark
Too bad as I thought we had a real nice set of boards. Haven't heard a word from him and I've tried to contact him.
Since there were some that didn't have confidence in the PSU boards I suggested we just start with the 3 amp boards, but again, no response.
All I need are the files to send them in.
Mark
But still....it's been two months. I hope he is alright!
As Rom-a movie character said: We hungry.....
As Rom-a movie character said: We hungry.....
Most folks do not know what goes into pulling together a GB or designing a board to suit all.
I thought DIYstore had F5t boards being done ...?
Also Toecutter had test boards made up and they were sent out, has anyone finish testing boards , I guess boards were taken with no return info..
Toe may be frustrated over this .... No return effort !!!!
Last edited:
Buzz, don't get aggressive, and don't get me wrong.
I was just making fun/talking.
Also I noticed what a.wayne said, no feedback(NFB hehehe), unless of course that was done via pm or emails.
I was just making fun/talking.
Also I noticed what a.wayne said, no feedback(NFB hehehe), unless of course that was done via pm or emails.
We were ready to go, then someone found an issue with one of the boards, which Toecutter fixed, then there was an ongoing discussion about the PSU boards.
I was not being aggressive at all and I am not upset at all. I am happy to do the GB. Just pointing out the fact that a lot of work goes unseen. Just trying to be encouraging to ToeCutter's efforts. NO offense intended and none taken.
Buzz 🙂
I understand the "backstage" work required, I just hope this project sees the light of day.
Cheers to all the participants!
I understand the "backstage" work required, I just hope this project sees the light of day.
Cheers to all the participants!
what issue on wich board? i have the prototype V3 boards. and gattering parts as we speak.
- Status
- Not open for further replies.