hello to everyone
I have designed a line preamplifier with 6c19 because iwanted a litle gain.
The rise is 120 v with load 2k. The cathode resistor i ve put 2k trimmer 1,5k parallel to regulate the milliamper. The best sound passes between 35-50 milliamper.
The gains is sligntly below 2. I ve thougnt to make another for gain.
I would like your opinion.
somone bouilt something similar?
sorre for the not so good English i
I have designed a line preamplifier with 6c19 because iwanted a litle gain.
The rise is 120 v with load 2k. The cathode resistor i ve put 2k trimmer 1,5k parallel to regulate the milliamper. The best sound passes between 35-50 milliamper.
The gains is sligntly below 2. I ve thougnt to make another for gain.
I would like your opinion.
somone bouilt something similar?
sorre for the not so good English i
Attachments
No need to say sorry !
WOW
This looks nice
Can you share your schematic
What a nice chassis you have there did it yourself ?
Thanks,
Audiofanatic
WOW
This looks nice
Can you share your schematic
What a nice chassis you have there did it yourself ?
Thanks,
Audiofanatic
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- line preamplifier with 6c10