Did anyone try B20 with a tweeter or piezo in Open Baffle? Any suggestions and impression?
Of course. The B20 is about the best value there is at $20. It will deliver
OK bass in a larger OB and it's pretty smooth over the audio spectrum. It
does benefit from a little sugar on top via an inexpensive tweeter - I bought
about 2000 pieces at $0.39 from Parts Express, which I've been giving away
at Burning Amps. I put a 1 uF in series to cross it at about 10 KHz, and you
can think about putting one on the back running opposite phase.
Of course. The B20 is about the best value there is at $20. It will deliver
OK bass in a larger OB and it's pretty smooth over the audio spectrum. It
does benefit from a little sugar on top via an inexpensive tweeter - I bought
about 2000 pieces at $0.39 from Parts Express, which I've been giving away
at Burning Amps. I put a 1 uF in series to cross it at about 10 KHz, and you
can think about putting one on the back running opposite phase.
sounds like a great project in the near future (have 2 B20s sitting idle.)
I put a 1 uF in series to cross it at about 10 KHz, and you
can think about putting one on the back running opposite phase.
how would I do this in OB?
can I use a cheap amp potentiometer to dial in varying Resistance? (instead of L-pad?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.