Pleasure to see them building something i have made... a non selfish behavior
very strange for selfish people to understand.
The pleasure to destroy the wall engineers constructed not teaching people...i am here to teach everyone about everything, giving them tips and ticks and showing them how easy is this stuff and to give an end to myths and mistification people build to increase their importance..to simplify.
People have dennied to teach me, here, in my country, the ones knows (5 guys) do not tell secrets, they keep to themself to have an advantage above others....i am spreading how to design and also showing failures in their designs..proving they are copying from Marshall leach...i am doing the opposite, teaching to everybody all i know... so... their advantage is very near to finish.
Enjoyment to see people happy... this is wonderfull...drives me very happy...it is very good..try it once, you will like.
This conversation is off topic...wanna build?..then here i am...do not wanna build?... then i will see you latter.
be happy!
Carlos
very strange for selfish people to understand.
The pleasure to destroy the wall engineers constructed not teaching people...i am here to teach everyone about everything, giving them tips and ticks and showing them how easy is this stuff and to give an end to myths and mistification people build to increase their importance..to simplify.
People have dennied to teach me, here, in my country, the ones knows (5 guys) do not tell secrets, they keep to themself to have an advantage above others....i am spreading how to design and also showing failures in their designs..proving they are copying from Marshall leach...i am doing the opposite, teaching to everybody all i know... so... their advantage is very near to finish.
Enjoyment to see people happy... this is wonderfull...drives me very happy...it is very good..try it once, you will like.
This conversation is off topic...wanna build?..then here i am...do not wanna build?... then i will see you latter.
be happy!
Carlos
Last edited:
Dx amplifiers, the inexhaustible source of pleasure for me and you
Give me a change to be happy once more, build one of my amplifiers...and give yourself a change to be happy once more too, build a Dx Amplifiers.
Enjoyment, fun and good moments guaranteed!
regards,
Carlos
Give me a change to be happy once more, build one of my amplifiers...and give yourself a change to be happy once more too, build a Dx Amplifiers.
Enjoyment, fun and good moments guaranteed!
regards,
Carlos
Attachments
Gentlemen may I ask that we return to topic and cut out the badgering of one another? Too many posts in this thread deal with personalities and not amplifiers. That makes me sad.
All rigth Cal Weldon.... you are rigth and your intervenction, as usual, was very
much apreciated.
Thank you.
regards,
Carlos
much apreciated.
Thank you.
regards,
Carlos
Stayin' on topic, could you kindly provide us CCIF IMD 19+20kHz measurement of your Dx Blame ES Carlos, at some 50W/4ohm.
I cannot -either - LoL.
Best regards - Rudi_Ratlos
P.S. But I can provide you some DX Blame audio samples - Heavy Metal, classics, ..., what is your concern?
Best regards - Rudi_Ratlos
An externally hosted image should be here but it was not working when we last tested it.
P.S. But I can provide you some DX Blame audio samples - Heavy Metal, classics, ..., what is your concern?
Last edited:
You wouldn't have any audio samples with Opeth playing, They tend to have quite the mix of Metal, and classical. I think they'd be the perfect test. Athought, It would also be a test of your speaker system and recording capabilities too.
Thanks,
Kurtis
If Carlos can't (I dunnu why) can you PMA, build a unit and run this test? It will be helpful to have such a test for a DIY project. It is DIY after all, do you really need such figure? If it is way important, please, give us a hand, build a unit, and provide the test results here so we can all see what you got.
Last edited:
Prototype board
The prototype-board arrived today.
Here it is:
METAL did a great job indeed (in the meantime he still improved the layout).
I can tell you: if METAL ever decides to offer you (DIY - community) the DX Blame PCB it will have an absolutely professional "touch and feel"
(compared to this prototype): with Silkscreen legend, soldermask, being contacted-through, ...
It is now my task to check if all components fit as desired (meaning: sizes of the grids, diameters of the drilled holes,...)
When done I will send it to Carlos who will set the prototype up and approve it (or not).
And in case Carlos approves- maybe: METAL and I will open another thread, in a more commercial room, offering you an universal DX Blame PCB
(and another PCB containing Soft-Power-On and LS-Protect on one board - but still a secret) so you are able to listen to the best AMP you have ever heared in your life.
Best regards - Rudi_Ratlos
The prototype-board arrived today.
Here it is:
An externally hosted image should be here but it was not working when we last tested it.
METAL did a great job indeed (in the meantime he still improved the layout).
I can tell you: if METAL ever decides to offer you (DIY - community) the DX Blame PCB it will have an absolutely professional "touch and feel"
(compared to this prototype): with Silkscreen legend, soldermask, being contacted-through, ...
It is now my task to check if all components fit as desired (meaning: sizes of the grids, diameters of the drilled holes,...)
When done I will send it to Carlos who will set the prototype up and approve it (or not).
And in case Carlos approves- maybe: METAL and I will open another thread, in a more commercial room, offering you an universal DX Blame PCB
(and another PCB containing Soft-Power-On and LS-Protect on one board - but still a secret) so you are able to listen to the best AMP you have ever heared in your life.
Best regards - Rudi_Ratlos
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
Very good...nice board and very interesting plans
Assemble yours as soon as you can.... this will save time.
Mail to Brazil, even express mail, can delay a little because we have the customs agents checking everything enters and exit... so... there's time spent travelling, and also bureaucratic time wasted in inspections.... sadly... this still happens here.... i hope soon will change because internet..we have already 130 millions computers operating...and more than that of cell phones...so.... modern life ask for more faster movements, faster decisions and less bureaucracy.
regards,
Carlos
Assemble yours as soon as you can.... this will save time.
Mail to Brazil, even express mail, can delay a little because we have the customs agents checking everything enters and exit... so... there's time spent travelling, and also bureaucratic time wasted in inspections.... sadly... this still happens here.... i hope soon will change because internet..we have already 130 millions computers operating...and more than that of cell phones...so.... modern life ask for more faster movements, faster decisions and less bureaucracy.
regards,
Carlos
Last edited:
Young man (METAL) is sleeping while old man (I) is doing all the thinking.
That's life.
Rudi_Ratlos
That's life.
Rudi_Ratlos
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
A rest and a little ES Blame music will help you Rudi. Don't let these young guys get away with it. Work, work, work them harder, boss. LoL
OK, so Ekkart's amp is running now, maybe? What does he think of stereo Blame ES sound? This would be interesting.
I have been looking in my junk box for a CCIF IMD 19 +20 kHz IMD measurer but I think mine is broken - sorry.
OK, so Ekkart's amp is running now, maybe? What does he think of stereo Blame ES sound? This would be interesting.
I have been looking in my junk box for a CCIF IMD 19 +20 kHz IMD measurer but I think mine is broken - sorry.
Last edited:
If the package is small, perhaps a bubble padded envelope instead of a box, with no heatsinks, chance are customs will not pay any attention to it.
In addition to that, if it's sent by a person and not a company, and the declared value is less than u$s 50, it will pay not taxes and get through fast.
Carlos
Nice try Rudi & Ian 🙂
That's why you both are never a business owners 😎
Attachments
I will send you the prototype PCB of the DX Blame today, Carlos, using AIRMAIL Express.
I will use an inconspicuous envelope (thank you for your advise, Calmart).
I checked the prototype for dimension of the components, drill-holes, ..
... have done my best.
Keep your fingers crossed, Carlos, so nothing happens to this preciosity.
Best regards - Rudi_Ratlos
I will use an inconspicuous envelope (thank you for your advise, Calmart).
I checked the prototype for dimension of the components, drill-holes, ..
An externally hosted image should be here but it was not working when we last tested it.
... have done my best.
Keep your fingers crossed, Carlos, so nothing happens to this preciosity.
Best regards - Rudi_Ratlos
An externally hosted image should be here but it was not working when we last tested it.
I will keep my fingers crossed.
I use to receive plastic bubbles envelopes including boards, also CDs, some small parts attached to card board and so on...beeing small, ligthweigth, informing what is inside and value, then no problems.
Can you, please, send me the images needed to assemble, the layout (last one), X ray vision (transparency, last one) and all images that will help to assemble..also 3D image if this was made too.
I have (HAD) several images during the board layout development process..but i have cleaned my hard drive and the ones i have saved may not be the last ones.
Hard drive was cleaned and I am back to XP Professional due to several compatibility troubles i had with the Windows 7, in special audio drivers... also my AGP was not happy with Windows 7.
I would like to have the updated, upgraded, last images made that matches the board you have sent... so, please, do me this kind favour, select the last images you have received and email them to me.
Once again, here is my adress, it is no secret.... i have no problems with the Police, no enemies (only competition), no political problems, anything to fear.... so...my home adress, pictures and all stuff can be published, in an open way, to the whole world... observe it to check, in special, the zip code number... as this is to the local postman to reach my place.... we still use Kombi - Volkwagen, to do this job (reliable alike Dx amplifiers)
Carlos Eugênio Mergulhão
Rua Dona Balbina Menelau 56 - 1601
Candeias - Jaboatão dos Guararapes
Pernambuco - Brasil
South America
Zip code: 54440-615
Portuguese language signs (^ and ~) if supressed, will not harm our reading and understanding
regards,
Carlos
I use to receive plastic bubbles envelopes including boards, also CDs, some small parts attached to card board and so on...beeing small, ligthweigth, informing what is inside and value, then no problems.
Can you, please, send me the images needed to assemble, the layout (last one), X ray vision (transparency, last one) and all images that will help to assemble..also 3D image if this was made too.
I have (HAD) several images during the board layout development process..but i have cleaned my hard drive and the ones i have saved may not be the last ones.
Hard drive was cleaned and I am back to XP Professional due to several compatibility troubles i had with the Windows 7, in special audio drivers... also my AGP was not happy with Windows 7.
I would like to have the updated, upgraded, last images made that matches the board you have sent... so, please, do me this kind favour, select the last images you have received and email them to me.
Once again, here is my adress, it is no secret.... i have no problems with the Police, no enemies (only competition), no political problems, anything to fear.... so...my home adress, pictures and all stuff can be published, in an open way, to the whole world... observe it to check, in special, the zip code number... as this is to the local postman to reach my place.... we still use Kombi - Volkwagen, to do this job (reliable alike Dx amplifiers)
Carlos Eugênio Mergulhão
Rua Dona Balbina Menelau 56 - 1601
Candeias - Jaboatão dos Guararapes
Pernambuco - Brasil
South America
Zip code: 54440-615
Portuguese language signs (^ and ~) if supressed, will not harm our reading and understanding
regards,
Carlos
Attachments
Last edited:
Hi Carlos
Thanks for the nice, big load of U-tube. Heaps of reminders of other times and great music. Dunno about the back masking stuff, though.
Thanks for the nice, big load of U-tube. Heaps of reminders of other times and great music. Dunno about the back masking stuff, though.
You are welcome Ian Finch
I am concentrated on video edition and things alike to improve some productions.
I love video and photography too...it is another big passion... for a while i have not the good tools to produce awsome results..but i am working to make it.
regards,
Carlos
I am concentrated on video edition and things alike to improve some productions.
I love video and photography too...it is another big passion... for a while i have not the good tools to produce awsome results..but i am working to make it.
regards,
Carlos
- Status
- Not open for further replies.