• The Vendor's Bazaar forum is for commercial offers and transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

1000 Piece Resistor Kit 1% metal film 0.6W all useful values $33 each incl shipping

Status
Not open for further replies.
Jump to Latest
L

len_scanlan

Member
Joined 2004
#1
These kits contain 1000 metal film axial resistors, 1% tolerance, 0.6 watt rating.

I have selected 36 different values which represent the most commonly used values for audio and general electronics work. No junk values - who needs a 750K resistor?

These resistors are brand-new stock, supplied as cut tape with the resistor value marked on the paper tape.

You get 25 pieces of each of the following values, except for four commonly used values marked with a (*) for which you get 50 pieces.

10 ohms
22
47
68
100 (*)
150
220
270
330
390
470
560
680
1K ohms (*)
1.5K
2.2K
2.7K
3.3K
3.9K
4.7K
5.6K
6.8K
8.2K
10K (*)
12K
15K
18K
22K
27K
33K
39K
47K (*)
100K
220K
470K
1Meg ohms

For these kits I've selected more values in the useful 1K-47K range, perfect for most audio work. Plus some higher + lower values for CMOS logic, LEDs, Micros etc.

If you need different values, I can make up a kit of 1000pcs of any E12 values for the same cost.

Price includes airmail shipping:
$US 33.00 to USA / Canada / South America
28 Euros to Europe
$AU 36.00 to Australia
$NZ 40.00 to New Zealand

Parts shipped via air mail from NZ, depending on your location they'll take 3-8 days. Paypal preferred
 
#4
i'll grab one mate, are they the vishay .6w or something else? It doesnt matter so much though, i'll grab them either way, because they wont be used so much in the signal path, the matching is more important to me and size. i'll have a look at upcoming BOMs and see if there is any value missing I might need, but yeah i'll grab one all the same
 
Last edited:
#8
Hi Claudio,

I buy these resistors from several local distributors - sometimes one distributor does not have all values in stock.

The current stock is from Royal Ohm (Resistor -Royal Electronic Factory (Thailand) Co., Ltd.), type MF60S, 200ppm tempco I think. These are pretty much the same as all other generic metal film resistors - use these ones for PSUs, digital, experimenting, etc and then fit the best dale / caddock / vishays for the critical audio path if you like

regards,

Len.

claudio said:
Hi Len,
may I know brand or PPM value?
Thanks.
Click to expand...
 
#13
Len,
I am in the process of putting together a list of resistor values for the Leach 12 clone amp. I will definately like a set of these resistors so count me in. There are only a few values unique to the amp which you have not already listed. I will email to you Monday.

Thanks Tad
 
#17
Here's a photo of the resistor kit - nothing fancy, I just stamp the value on each strip of resistors.

-Len.
 

Attachments

  • Resistor_Kit.JPG
    Resistor_Kit.JPG
    193 KB · Views: 368
#18
I have been trying to get you on email, but they keep on bouncing back. do you have another one that I can contact you on? I would like to go ahead tomorrow. will let you know what values I would like more of by email,

thanks
 
Status
Not open for further replies.
Top Bottom