• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

OLD THREAD DAC End by Andrea Ciuffoli

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
A

Agi

Member
Joined 2008
D

danico

Member
Joined 2010
I can also reccomend some great Russian and Ukraine sellers from ebay.
They are fast, reliables and cheap.
I got tube socket from here and they ceramic sockets. $7 9 pieces.
eBay Seller: mycomponent: socket, Electronics items on eBay.com

Or for silver plated socket and tubes go here:
Sockets 7 silver pins tube Soviet ceramic Lot of 10 - eBay (item 390041061847 end time Apr-25-10 07:09:02 PDT)

For great tubes OKT from 60's and PIO audio caps:

eBay Seller: rus rf: Computers Networking items on eBay.com

I hope you guy gonna like it.

I have one question. If I order the boards how long the waiting time for that?
Thanks.
 
A

audiodesign

Banned
Joined 2005
Zsolt,
see image
 

Attachments

  • cs8414a.gif
    cs8414a.gif
    9.4 KB · Views: 349
V

vzs

Member
Joined 2005
audiodesign said:
Zsolt,
see image
Click to expand...

Yes, I know that pin 24 - M1 should be at +5V, as I wrote: "So one selects the format of the serial output from the receiver, which in our case is LSBJ, thus M3-M0 should be 0110.".

My question was why pin 24 (M1) was connected to analog v+ instead of digital V+. It could/should be connectet to pin 18 - M2 and both could be directly connected to digital V+, without a separate TL431 for them.

Thanks,
Zsolt
 
H

housing

Member
Joined 2006
Hi Quanghao,

I haven't received my Salas Shunt Regulator nor the DAC end despite half a month has passed. :(

Moreover I think I need the tube I/V stage PCB now. Please send them along together with the 2 PCBs for I/V stage Shunt supply that I have ordered in the other group buy thread when everything is ready.

Thanks.
 
ims

ims

Member
Joined 2008
Correction for my request

Quang Hao,
I want to make a correction for my request: it's not 2x PCB- Supply for I/V which I need but 2x PCB Salas shunt for DAC.

Please update for me.
Thanks.

ims said:
12. ims: 2 x PCB Salas shunt for DAC

As I understand, the prices will be:
2 x PCB Salas shunt for DAC = 2 x $15
Shipping = $6
(so far $36)
Plus Payment by PayPal fee 3.5% = $37.26
Is that correct?

I will make a payment to: quanghao168@yahoo.com.vn
Is this your valid paypal account for now?

Thanks.
Click to expand...
 
quanghao

quanghao

Member
Joined 2009
quanghao.com/
housing said:
Hi Quanghao,

I haven't received my Salas Shunt Regulator nor the DAC end despite half a month has passed. :(

Moreover I think I need the tube I/V stage PCB now. Please send them along together with the 2 PCBs for I/V stage Shunt supply that I have ordered in the other group buy thread when everything is ready.

Thanks.
Click to expand...

I was sent it to you, PCb Salas shunt for DAC
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom