1)
1kVA 43-0
1kVA 0-43
The two need to be used together for 43-0-43 at 2kVA. New.
2) 800VA 56-0-56vac 2 each. Used in the Forte Model 3 power amp. Used.
3) 800VA 52-0-52vac 1x each Used.
4) 40-0-40vac 360VA x2 each. Used pull outs from Adcom 545 100wpc amps. They are sealed cans.
5) 60-0-60vac 675va Adcom 555 pull out. Sealed/canned. 1x
1kVA 43-0
1kVA 0-43
The two need to be used together for 43-0-43 at 2kVA. New.
2) 800VA 56-0-56vac 2 each. Used in the Forte Model 3 power amp. Used.
3) 800VA 52-0-52vac 1x each Used.
4) 40-0-40vac 360VA x2 each. Used pull outs from Adcom 545 100wpc amps. They are sealed cans.
5) 60-0-60vac 675va Adcom 555 pull out. Sealed/canned. 1x
Some sold, listing other items
1) Plitron 1kVA 33-0-33 used but excellent cond. $90
2) 800VA 56-0-56vac 2 each. Used in the Forte Model 3 power amp. Used. $60 each
3) 800VA 52-0-52vac 1x each Used in some electrocompaniat Amplifier. $55 each
4) 1kvA 65-0-65 toroids unused/new $75 eac, I have 2
5) 60-0-60vac 675va Adcom 555ii pull outs. Sealed/canned. 5x $65
6) 60-0-60vac 800VA New unused Avel's x2 $90 ea
1) Plitron 1kVA 33-0-33 used but excellent cond. $90
2) 800VA 56-0-56vac 2 each. Used in the Forte Model 3 power amp. Used. $60 each
3) 800VA 52-0-52vac 1x each Used in some electrocompaniat Amplifier. $55 each
4) 1kvA 65-0-65 toroids unused/new $75 eac, I have 2
5) 60-0-60vac 675va Adcom 555ii pull outs. Sealed/canned. 5x $65
6) 60-0-60vac 800VA New unused Avel's x2 $90 ea
DreadPirate said:
Other party paid, but if anything happens I will post an update. Shipping at cost yes, but might add cost of packing material if I find none at home thats reusable.
True.... but the larger Adcom with 60-0-60, wire the prims in series, that will give you 30-0-30... thats about 41vDC per rail...
running a 220Vac transformer at 110Vac will reduce the VA rating by about half.
Expect the 675VA rating to reduce to ~350VA.
I'd say you goto usps.com and calculate shipping to your satisfaction. Each toroid will be about 13-16 lbs and add 2-3lbs for packaging.
Shipping from Indiana IN 46256.
Hope this helps.
The Plitron has 2x 115vac priamries so it should be good for 240 mains. But the sec voltages may be 34-35vac on 240.
Do you know if the toroid on the Forte model 3 can be used as a replacement on a Forte model 1? Model 1 uses 57V
The model 3 toroid was also used for their 50watt class-A version (1A?)
It can be wired for 78vdc or 39vdc rails, 78 for 200wpc class-AB and 39vdc for class-A 50 watts (all 8 ohms)
On AC it gives 56.5vac or half if wired for class-A
It can be wired for 78vdc or 39vdc rails, 78 for 200wpc class-AB and 39vdc for class-A 50 watts (all 8 ohms)
On AC it gives 56.5vac or half if wired for class-A
Last edited:
- Status
- Not open for further replies.