acoustat tnt 200 schematic
I'am looking for a schematics of acoustat tnt 200 amp. I got a unreadable low res. photo from this forum. Does somebody have a hi or med. resolution photo for this schematics amp? Somebody can post me?
Thanks
I'am looking for a schematics of acoustat tnt 200 amp. I got a unreadable low res. photo from this forum. Does somebody have a hi or med. resolution photo for this schematics amp? Somebody can post me?
Thanks
I would like to get the schematics and manuals of TNP and TNT, please. Jim Strickland projects seem very very original.
Thanks
Roberto
Thanks
Roberto
I just sent the TNT-200 schematic to the poster above this one. I just scanned it via my new used Canon scanner. Seems to work nicely. It is a 330k 200dpi jpg file. I need email addresses so I can send the file. Sending me the email via private message also does no good, it is my work email. I think I'm going to change that right now, if I can. Or, conversely, see if I can reduce the jpg to a pure monochrome file, and it might be small enough to put here and still be high rez.
Nope...Not doable. (re: posting a workable image of the schematic) I might be imagining things - but it might be a purposeful aspect of the forum to stop bandwidth and copyright abusers. Sure does slow things down. K. I have changed my email, so I can now send and receive things from just about anywhere, and not be limited by being at work. I now have an iphone so I can send files while driving down the highway. Even in a blizzard. Like it's a priority or sumpthin'.
Nope...Not doable. (re: posting a workable image of the schematic) I might be imagining things - but it might be a purposeful aspect of the forum to stop bandwidth and copyright abusers. Sure does slow things down. K. I have changed my email, so I can now send and receive things from just about anywhere, and not be limited by being at work. I now have an iphone so I can send files while driving down the highway. Even in a blizzard. Like it's a priority or sumpthin'.
Please send it to me MoreFiles@gmail.com
I (or you) can put it up on google hosting account and just post a link if that is allowed and end all this having to log in / post an email stuff
I have an Acoustat TNT 200 and am considering selling it and having all the info available would make that easier
thanks
I (or you) can put it up on google hosting account and just post a link if that is allowed and end all this having to log in / post an email stuff
I have an Acoustat TNT 200 and am considering selling it and having all the info available would make that easier
thanks
Try visiting this free host site :
savefile.com
There should be enough space for anyone to do anything. Quite a bit of steps before you reach your destination but I think its worth that especially for guys with a big stomach.
savefile.com
There should be enough space for anyone to do anything. Quite a bit of steps before you reach your destination but I think its worth that especially for guys with a big stomach.
I would like a copy also. Is there a central location for schematics for the Acoustats (and repairs / modifications)?
Wow, talk about dredging up a thread!
Fwiw, afaik, the VN and VP are Siliconix devices... they may or may not be available today, but Vishay now owns the company, and there may be a roughly equivalent device you can sub in from them, or maybe even from another mfr like zetex, etc...
_-_-bear
PS. Hans Zwuee (spelling?) has a website called ummm... audio circuit? audio circle??... with Acoustat info there... also in the section for ESLs on this site a lot of info...
Fwiw, afaik, the VN and VP are Siliconix devices... they may or may not be available today, but Vishay now owns the company, and there may be a roughly equivalent device you can sub in from them, or maybe even from another mfr like zetex, etc...
_-_-bear
PS. Hans Zwuee (spelling?) has a website called ummm... audio circuit? audio circle??... with Acoustat info there... also in the section for ESLs on this site a lot of info...
Oh this is a rail swinger amp AKA QSC type design. where the outputs are grounded and the output is taken from the center of the power supply caps. the nice thing about these amps is that if an output device blows. No DC to the speaker. lots of PA amps are built this way now today but QSC was the first i think to do it on a large scale.
Wow, it is old! I thought it was Jan 2010 ... 😀
I found the page (Hans Zeeuwe, audiocircuit.com) Thanks!
It is hard getting information about the Model X. OTL ESL Amps, pretty cool!
Please I would like if you sent the TNP and the TNT schematics to me.
bricbrac@libero.it
Tank you very much
bricbrac@libero.it
Tank you very much
Copy of the schematic please.
KBP
Could I have a copy please.
My email address is brian@scallydesign.com
Many thanks
Brian Scally
KBP
Could I have a copy please.
My email address is brian@scallydesign.com
Many thanks
Brian Scally
Hi all,
Anyone find, or come up with some simple mods to this wonderful amp(tnt200), to bring out the best in it? Upgraded the filter caps already to triple the original values, and also the rectifiers to Hexfreddies... What a beautifully simple, but superb sounding amp! Have 3 of these puppies, and still hunting... 🙂
Anyone find, or come up with some simple mods to this wonderful amp(tnt200), to bring out the best in it? Upgraded the filter caps already to triple the original values, and also the rectifiers to Hexfreddies... What a beautifully simple, but superb sounding amp! Have 3 of these puppies, and still hunting... 🙂
- Status
- Not open for further replies.