• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Another European AD1865N-K GB

Status
Not open for further replies.
Jump to Latest
ernesternest

ernesternest

Member
Joined 2007
Paid Member
#1
Hi,

would like to order AD1865N-K from Digikey. Minimum order is 15 pcs, but I need just 1 or 2 for Andrea Ciuffoli's DAC. Price there (now) is 25 Euros a piece plus 19% German VAT.

So I'm looking for a few nice people who would need some too. They don't have it in stock, so patience is needed. I think, it takes 7 weeks to get them delivered.

Besides that I'll order DALE resistors, Panasonic resistors and electrolytis for this project as well. If you were interested in that as well...

Regards

Ernst
 
#5
Hi Ernst,

of course you can count me in, I guess for 3 pieces. I was already thinking of starting a GB, glad you took over the job....
I'm also busy with getting the parts together, I'm going to call you later this week.


Cheers,

Juergen
 
#8
Hi guys, hi Ernst

I did the last EPGB. (European Group Buy)

Shipping per "Einschreiben versichert bis 100 EUR" with DHL to Europe ist 6,95, to world is 9,55 EUR, but maybe it's not possible to US.

DK sends with UPS and they charged me about 60 Euro (Nachnahme), I dont know exactly what this is for .. still waiting for an invoice. EuSt. would be more 😕

Tell you more, when getting details from UPS.

Overall our first ETA for the chips was end of March, corrected later to end of Jan what was only 4 weeks after ordering.

regards Michael
 
#9
Digikey

Hi,

so far we have:

vzs: 1
NICKEL: 1
Jogi: 3
Der: 1


Thanks for advices. My last GB was a pcb job for an amp project one year ago. I sent them all around the world. All the pcbs were sent as registered letters. Cheap and reliable. I don't remember prices exactly, the range was between € 3,5 (Germany below 500g) and € 10,05 (Overseas - i.e. US, Down Under, Brazil). Seems that prices rose minimal.

mikel_ann, I don't know exactly, but I do think, the 60 Euro should have been the 19% VAT. You shouldn't get another invoice. Always when I ordered from Digikey it was like that.

Price for the AS1865N-K currently is about 24,20 € (always depending on € / $ rate) This makes almost 29 € inkluding VAT. Shipping to US is roughly 10 €. I'll take 2€ for package and effort. Summarizes for one AD to US:
29+10+2= 41 Euro plus ~ 4% for Paypal

Price for
CMF55 is € 0,13 plus 19% VAT = € 0,1547 per Resistor.
Panansonic NHG 4700µF/25V is € 1,42 plus 19% VAT = € 1,7
Panasonic Resistor 2W is € 0,22 plus ...... = € 0,262
Panasonic Resistor 3W is € 0,39 ............... = € 0,465
IRF840 is € 2,59 ............. = € 3,09
Panansonic ED 47/450 is € 3,10 ............. = € 3,70

These are the parts, I'd order from Digikey. Tomorrow I'll share a google spreadsheet where I'll add all the parts. If you are interested, add your name.

Cheers Ernst
 
Last edited:
#15
Spreadsheet

Hi,

10 of 15 (minimum) 😀

please have a look at the spreadsheet. I've already added most of you guys. I offer a few more parts to buy and forward, since I need them anyway.

Price for the IRF 840 from Digikey is too high.

If anybody is interested, I have a good source for IRFP240 and IRFP9240. They'll be below 4 Euro.

Cheers Ernst
 
Last edited:
#18
Spreadsheet

Hi Ernest

Thank you for this group buy. Hopefully I completed the spreadsheet for the parts required.

I'm not in any hurry, so take you time with parts. I'm very grateful you are doing this as its hell to find these in NZ in small quantities.

Cheers

Nick
 
#19
12 of 15, not as good as 7 of 9 but good enough for this project

Good progress 😎

I prepared a copy of the "official" BOM, that shows the offered parts highlighted.
The other parts I do not offer so far. On the one hand so far I don't know which parts to use, since the original BOM does not mention the brand, on the other hand I have not been looking for a source for the other branded parts, like Nichichon, Rubycon ..

Is anyone interested in the Caddocs MK132? Is there a reliable source in Europe? I found an onlineshop in the US, but for me alone I am afraid, P&P will be too high. Is anyone interested in these items? Price is $4.20 each. They would have to backorder them. I think this is ok, pricewise. I try to get a quote for the P&P.

Panasonic Relais seems not easy to get. I think it shouldn't be to difficult to find a replacment. Any idea?

Here is a link to my prepared BOM: https://spreadsheets.google.com/ccc?key=0Ap56Xc-v9uPHdGtGSGVFdzdqQm1QMDJ4aDViaC14SkE&hl=en

Thanks EUVL, haven't had a look to Reichelt. I know he has got original IRF (now Vishay). I'll asking my source for a quote. Should be somewhere in the pricerange of Reichelt, maybe a bit above. I just wrote <4, because this was the Digikey price. Lets see.

Would be great, if I could get some proposals for the other parts right from the specialists here 😉

Cheers Ernst
 
Status
Not open for further replies.
Top Bottom