am new to the forums and just wanted to express my gratitude to Nelson Pass and Joe Sammut Jr. for the great product and great support I've come to experience over the years from Pass Labs.
my first pass amps were apleph 2's and aleph p. i've since added a pair of 1.2's pass X0 pre and recently an x350.
couldn't be happier........
my first pass amps were apleph 2's and aleph p. i've since added a pair of 1.2's pass X0 pre and recently an x350.
couldn't be happier........
Attachments
fugly!!
^--- This is ZenModdish for "Nice!" ---^ 😀
Lovely listening room and equipment! 🙂
Cheers!
thanks everyone for your kind comments.
i was a little worried there for a while for exposing myself as a consumerist amongst an armada of diy's....😉 but it seems damage control kicked in and my flame suit held up rather nicely....
glad to have found this community where i will finally get some insight into curcuit and amp designs to better evaluate what's out there.....
i was a little worried there for a while for exposing myself as a consumerist amongst an armada of diy's....😉 but it seems damage control kicked in and my flame suit held up rather nicely....
glad to have found this community where i will finally get some insight into curcuit and amp designs to better evaluate what's out there.....
just to confirm that i've regained my sanity, i ordered an x-250 and xp10 today.
will use the x-250 to drive a pair of electra 1037 and the xp10 will be hooked to the halcro's....
will use the x-250 to drive a pair of electra 1037 and the xp10 will be hooked to the halcro's....
hmmmm....while having enjoyed a 'two left hands' youth, I have since developed a bit of a mechanical understanding. so if I decide to 'fix' something, I does not automatically end up broken...😀
i will do some more reading and might end up taking your advice......
Once you start you cant stop.
I was only going to build one amplifier when I first started. I have now built 3, with another 3 on the drawing board.
I was only going to build one amplifier when I first started. I have now built 3, with another 3 on the drawing board.
There is a lot of fun and satisfaction waiting for you 😎
Buying gear just don't cut it, once you get to make your own.
Magura 🙂
Oh, no worries about flaming.
We just sit back and wait for the DIY-bug to bite you, then you're toast 😀
Magura 🙂
- Status
- Not open for further replies.