Can this work

kornnylike · 13th April 2010, 07:30 PM

Would ths design work with this data to get 3m or more horn length

Ciare18_00SW.jpg

scoop.jpg

BP1Fanatic · 13th April 2010, 08:26 PM

You modeled a FLH and your pic shows a TH. TH/RLH/Scoops don't have Vrc & Lrc.

kornnylike · 13th April 2010, 08:58 PM

it is a scoop with more horn length

kornnylike · 13th April 2010, 09:00 PM

call it a tapped scoop

soho54 · 13th April 2010, 09:45 PM

Whatever you call it, you can't model a tapped horn/pipe/line/scoop with a normal standard (Nd) horn model. You need a sim that includes the rear wave output, like say the TH or OD options in Honresp.

I would use TH here.

This is assuming I understand your intention. Placing the driver in your pic would help clear up any misunderstanding.

MaVo · 14th April 2010, 12:47 AM

Your pic shows a rearchamber, but the drawing shows none. If you want to sim whats on the drawing, either use TH or enter 0 in the rearchamber volume and depth and use the combine front with back of driver response tool.

kornnylike · 14th April 2010, 01:31 AM

. Placing the driver in your pic would help clear up any misunderstanding.[/QUOTE]

soho here we go, see below

also i am just learning this program please see with me

scoop.jpg

godfrey · 14th April 2010, 03:00 AM

What you modeled in Hornresp is a front-loaded horn.
It has a closed box behind the driver.
See the pic for how the measurements work.

godfrey · 14th April 2010, 03:16 AM

You could fold it up something like this.
There's probably better ways though...

soho54 · 05:09 AM

godfrey, you sim explanation example is a front loading horn (Nd) your enclosure drawing is a folded offset driver FLH (OD)

13th April 2010, 07:30 PM	#1
kornnylike diyAudio Member Join Date: Apr 2010	Can this work Would ths design work with this data to get 3m or more horn length Ciare18_00SW.jpg scoop.jpg

14th April 2010, 05:07 AM	#10
soho54 diyAudio Member Join Date: Nov 2005 Location: Georgia	godfrey, you sim explanation example is a front loading horn (Nd) your enclosure drawing is a folded offset driver FLH (OD) Last edited by soho54; 14th April 2010 at 05:09 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Would this work	Bibio	Full Range	2	30th March 2009 12:20 PM
Please, let them work....	sparkle	Digital Source	0	30th April 2004 10:00 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th April 2010, 08:26 PM	#2
BP1Fanatic diyAudio Member Join Date: Jan 2009 Location: Columbus, Ohio	You modeled a FLH and your pic shows a TH. TH/RLH/Scoops don't have Vrc & Lrc.

13th April 2010, 08:58 PM	#3
kornnylike diyAudio Member Join Date: Apr 2010	it is a scoop with more horn length

13th April 2010, 09:00 PM	#4
kornnylike diyAudio Member Join Date: Apr 2010	call it a tapped scoop

13th April 2010, 09:45 PM	#5
soho54 diyAudio Member Join Date: Nov 2005 Location: Georgia	Whatever you call it, you can't model a tapped horn/pipe/line/scoop with a normal standard (Nd) horn model. You need a sim that includes the rear wave output, like say the TH or OD options in Honresp. I would use TH here. This is assuming I understand your intention. Placing the driver in your pic would help clear up any misunderstanding.

14th April 2010, 12:47 AM	#6
MaVo diyAudio Member Join Date: Jan 2006 Location: Herne	Your pic shows a rearchamber, but the drawing shows none. If you want to sim whats on the drawing, either use TH or enter 0 in the rearchamber volume and depth and use the combine front with back of driver response tool.

14th April 2010, 01:31 AM	#7
kornnylike diyAudio Member Join Date: Apr 2010	. Placing the driver in your pic would help clear up any misunderstanding.[/QUOTE] soho here we go, see below also i am just learning this program please see with me scoop.jpg

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)