Pictures of your diy Pass amplifier - Page 136

fdlsys · 12th September 2012, 05:39 PM

Quote:

Originally Posted by buzzforb

Thats awesome Fdlsys. You mind if I copy

Mind? MIND??
I'd be proud! No one copies the ugly stuff!

buzzforb · 12th September 2012, 05:44 PM

I am in the glass industry, so this brings my hobby close to home. Had considered etched glass with just lettering clear, but it can be overpowqering. I really like you backlit version. did good job with proportions as well.

fdlsys · 12th September 2012, 05:57 PM

Quote:

Originally Posted by buzzforb

...I really like you backlit version. did good job with proportions as well.

Shout of you need the recipe for the LED count and placing? BTW, I used 6mm acrylic sandwiched with 3mm Alu front. Nice balance if I may say so. Total weight was a concern, so everything was designed with that in mind.

Amber light-show was intended at matching my valve pre-amp glow, and it does so perfectly! And the whole thing is a (subtle?) metaphor; F5 being as close as solid state can get to lush and rich valve-sound

Prince3121 · 13th September 2012, 07:29 AM

Quote:

Originally Posted by AndrewT

any chance you could attach more resolution than 160x91?

Here they are...

alex mm · 06:50 PM

....my unfinished amplifier , missing some parts

Alex.

AudioSan · 13th September 2012, 06:49 PM

this do not look like any pass clone

wich amp is it?

luvdunhill · 13th September 2012, 06:55 PM

You are adding a lot of thermal resistance with the stacked cancer pads.

AndrewT · 14th September 2012, 09:01 AM

Quote:

Originally Posted by luvdunhill

You are adding a lot of thermal resistance with the stacked cancer (aluminium oxide?) pads.

terrible solution to the Thermal Dissipation!

ticktock · 14th September 2012, 10:25 AM

Yes, fit a large block of copper instead.

AndrewT · 14th September 2012, 11:06 AM

bend the leads and fit it direct to the heatsink !!!

12th September 2012, 05:44 PM	#1352
buzzforb diyAudio Member Join Date: Oct 2010 Location: Burlington, NC	I am in the glass industry, so this brings my hobby close to home. Had considered etched glass with just lettering clear, but it can be overpowqering. I really like you backlit version. did good job with proportions as well. __________________ \|F6 Kit/Trasnformer GB Sign up sheet Closed,\|Primrose GB Sign Up sheetClick Here ...Shape the sound , Man!

13th September 2012, 06:49 PM	#1356
AudioSan diyAudio Member Join Date: Feb 2009 Location: Trondheim	this do not look like any pass clone wich amp is it? __________________ aleph P1.7 pre. F5 power amp. CDpro2(need DAC). Vivaldi8 speakers

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Low Pass and Mid/High Pass (Bass Blocking) Filters	runslikealpaca	Everything Else	1	19th June 2009 10:59 PM
Naked pictures of Pass	Pete Fleming	Pass Labs	30	9th December 2006 06:39 AM
My new hifi amplifier (pictures)	Wejp	Chip Amps	23	15th October 2004 12:16 AM
Pass Diy High Low Pass Please	macka	Pass Labs	127	2nd March 2004 11:00 PM
DIY Pass labs 100watt amplifier.	microwalsh8504	Pass Labs	12	6th February 2004 07:27 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th September 2012, 06:55 PM	#1357
luvdunhill diyAudio Member Join Date: Jul 2006	You are adding a lot of thermal resistance with the stacked cancer pads.

14th September 2012, 10:25 AM	#1359
ticktock diyAudio Member Join Date: Dec 2006	Yes, fit a large block of copper instead.

14th September 2012, 11:06 AM	#1360
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	bend the leads and fit it direct to the heatsink !!!