The secret of building a good 2-way - Page 3 - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th May 2009, 12:37 AM   #21
tinitus is offline tinitus  Europe
diyAudio Moderator R.I.P.
 
Join Date: Nov 2005
OK then, thats surely much better
__________________
sometimes we know very little, and sometimes we know too much
  Reply With Quote
Old 14th May 2009, 12:44 AM   #22
DcibeL is offline DcibeL  Canada
diyAudio Member
 
DcibeL's Avatar
 
Join Date: May 2003
Location: Saskatchewan
Quote:
Originally posted by planet10
In 40 years of building speakers the best 2-way i've done is Tysen... active XO (PLLXO @ 333Hz) SDX8 sealed, FF85KeN in midTL.
Hi Dave,
I am intrigued by your two way utilizing a widerange driver. I have always been interested to build a two way in this fashion, but when comparing the use of a widerange driver to a small 1" tweeter, I found that widerange drivers have rather poor off-axis response at high frequencies. I believe this is due to basically beaming due to the large cone. A regular tweeter does much better in this sense, so I am forced to choose between poor high frequency off-axis (and for many drivers on-axis as well) response, or a crossover in an area where hearing is most sensitive. Would you agree?

And no, I don't think crossovers are evil at all, just too many speakers with non-optimal designs (read: poorly designed).
__________________
The power of Science compels you!
  Reply With Quote
Old 14th May 2009, 12:58 AM   #23
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Quote:
Originally posted by DcibeL
but when comparing the use of a widerange driver to a small 1" tweeter, I found that widerange drivers have rather poor off-axis response at high frequencies.
I often think of the FF85 as a 1" dome with a really big surround... on this one the dustcap is attached directly to the end of the voice coil.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 14th May 2009, 01:08 AM   #24
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
But the purity and treble of EJ Jordan JXR6HD is tops....At a price of course.
  Reply With Quote
Old 14th May 2009, 02:42 AM   #25
diyAudio Member
 
d to the g's Avatar
 
Join Date: Aug 2006
Location: minimalopolis
Quote:
Originally posted by planet10


In 40 years of building speakers the best 2-way i've done is Tysen... active XO (PLLXO @ 333Hz) SDX8 sealed, FF85KeN in midTL.

dave
I guess I'm not sure how a PLLXO (passive line level crossover) can be active.
  Reply With Quote
Old 14th May 2009, 02:45 AM   #26
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Default Tired 2 Way Box

Quote:
Originally posted by roger_lew
Salas,

Your Seas/HDS 2 way looks intriguing. Where is that one documented?

Roger

Quote:
Originally posted by Salas


Nowhere. I have the Leap crossover schematic data, I must measure the cabinet dimensions when I will visit my friend's place really soon and I will post here.
Attached Images
File Type: jpg tiredbox.jpg (56.6 KB, 2625 views)
  Reply With Quote
Old 14th May 2009, 02:46 AM   #27
diyAudio Member
 
Join Date: Jan 2004
Location: Toronto, ON, Canada
Quote:
Originally posted by d to the g


I guess I'm not sure how a PLLXO (passive line level crossover) can be active.
Perhaps it stands for phase locked loop... maybe.
  Reply With Quote
Old 14th May 2009, 02:59 AM   #28
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Default Tired 2 Way XO

Woofer = SEAS CA22RNY
Tweeter = Peerless HDS

L1 = 2.5mH (2mm d. wire)
L2 = 0.25mH (1mm d. wire)
L3 = 1mH (1mm d. wire)
C1= 4u7//0.68u PP high quality
C2 =10u//2u2 PP high quality
C3 =33u NP//0.22u PP high quality
R1 = 3R9 10W Mills
R3 = 15R 10W Cement

No polarity inversion nowhere. All inductors air core.
Attached Images
File Type: gif xr.gif (13.1 KB, 2287 views)
  Reply With Quote
Old 14th May 2009, 03:08 AM   #29
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
The woofer.
Attached Images
File Type: jpg ca22rny.jpg (27.4 KB, 2707 views)
  Reply With Quote
Old 14th May 2009, 03:10 AM   #30
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
The tweeter.
Attached Images
File Type: jpg hds.jpg (49.6 KB, 2347 views)
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
The secret janey peranders The Lounge 1 30th January 2006 09:09 AM
Building good stereo speakers Godfather7 Multi-Way 8 16th September 2005 08:08 PM
What's the secret? lumanauw Pass Labs 23 31st March 2005 04:11 AM
Good book on Speaker Building? pixie Multi-Way 14 30th May 2004 01:02 AM
good driver for speaker building sma Multi-Way 4 24th January 2004 08:44 AM


New To Site? Need Help?

All times are GMT. The time now is 01:19 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2