Thanks to some kind help by one of the moderators, the BOM attached to the first post has been updated. It turns out that while the first post can be edited by me, the attachments, not so much.
The list of components is the same, but some notes have been added after a little input from the GB "subscribers"...
If you have come across this thread just recently, please check out the two initial threads by MrEvil, or at least, some of the more recent technical discussion in the second thread, here:
http://www.diyaudio.com/forums/powe...hed-capacitance-multiplier-2.html#post3557054
http://www.diyaudio.com/forums/power-supplies/53359-finished-capacitance-multiplier.html
The list of components is the same, but some notes have been added after a little input from the GB "subscribers"...
If you have come across this thread just recently, please check out the two initial threads by MrEvil, or at least, some of the more recent technical discussion in the second thread, here:
http://www.diyaudio.com/forums/powe...hed-capacitance-multiplier-2.html#post3557054
http://www.diyaudio.com/forums/power-supplies/53359-finished-capacitance-multiplier.html
Last edited:
Your boards were included in the count, so that part is ok, but I did not post your name for some reason, sorry. Thanks for the reminder.
Finished my boards today with the exception of the diodes.
Parts were sourced using PMI's BOM and everything went in without a hitch...
Parts were sourced using PMI's BOM and everything went in without a hitch...
An externally hosted image should be here but it was not working when we last tested it.
The assembled boards look nice... first ones in the Southern Hemisphere, I think. You may be breaking new ground...
Yes, you can use those diodes, no problem.Hi Pete,
count me 2 boards + 2 sets JFETs & Mosfets
Also some other parts
I have some MUR1560's, can I use them?
Thanks
Second PCB order, Updated List
The second production batch or circuit boards is scheduled to ship from the manufacturer in the next day or two. I will start sending out invoices as soon as I have a confirmed ship date. The boards from this group will start to ship on August 20.
There are a couple unpaid/unclaimed boards from the last order. If still not claimed by the end of this week, the boards will be added to the lot used for the current group.
If you are one of the people who was not covered by the last order, or you signed up since August 20, your name should be listed below. If you do not see your name, please send me a PM, or make a short post. Please do not try to duplicate the list in your posts, it makes the thread harder to read. Thanks.
jj506 4
TheShaman 2
Raj1 6
Pinnocchio 2
Tinitus 2
Salas 1
Spind 6
Atupi 2
Baswamin 2
Tome 6
Touister 2
markus22ch 4
Atupi 2
Rick G 2
BDL 2
ipolyakov 2
danbmellow 2
Vladco 2
Malvin 2
tagheuer/fponto 4
Presbel 2
yyzz 6
NiMac 4
Bagelgogo 4
K.A.B 3
carsten.witt 2
quan 2
Jameshillj 2
joshvi 2
Ryssen 2
John Bali 2
The second production batch or circuit boards is scheduled to ship from the manufacturer in the next day or two. I will start sending out invoices as soon as I have a confirmed ship date. The boards from this group will start to ship on August 20.
There are a couple unpaid/unclaimed boards from the last order. If still not claimed by the end of this week, the boards will be added to the lot used for the current group.
If you are one of the people who was not covered by the last order, or you signed up since August 20, your name should be listed below. If you do not see your name, please send me a PM, or make a short post. Please do not try to duplicate the list in your posts, it makes the thread harder to read. Thanks.
jj506 4
TheShaman 2
Raj1 6
Pinnocchio 2
Tinitus 2
Salas 1
Spind 6
Atupi 2
Baswamin 2
Tome 6
Touister 2
markus22ch 4
Atupi 2
Rick G 2
BDL 2
ipolyakov 2
danbmellow 2
Vladco 2
Malvin 2
tagheuer/fponto 4
Presbel 2
yyzz 6
NiMac 4
Bagelgogo 4
K.A.B 3
carsten.witt 2
quan 2
Jameshillj 2
joshvi 2
Ryssen 2
John Bali 2
Last edited:
The PCB's for the second production order are in transit, and payment requests are starting to go out. Please review the BOM, and check the technical discussion for any latest comments and component Q&A.
http://www.diyaudio.com/forums/power-supplies/53359-finished-capacitance-multiplier.html
The components were chosen so they can all be ordered from Mouser.com, without splitting orders. However, please verify you can source the parts where you live. There are alternatives for all parts in the BOM. I can also make a few transistor kits for those having problems with parts.
http://www.diyaudio.com/forums/power-supplies/53359-finished-capacitance-multiplier.html
The components were chosen so they can all be ordered from Mouser.com, without splitting orders. However, please verify you can source the parts where you live. There are alternatives for all parts in the BOM. I can also make a few transistor kits for those having problems with parts.
Your boards are part of the order. I left your name off the list above, for some reason, sorry.
