TO-3 SYMASYM - Page 14

curryman · 5th October 2011, 07:47 PM

My PCBs also arrived today

Rudi: many thanks, really great work, boards look absolutely wonderful

Rudi_Ratlos · 6th October 2011, 06:15 AM

Dear SYMASYM friends,

I would appreciate very much, if you publish a picture of your build (when done) and tell us your impression of the TO-3 SYMASYM's sound.

Best regards - Rudi_Ratlos

Leatherface · 6th October 2011, 06:51 PM

When I'm ready, you'll get pics. But this will take a while. I still have to buy some missing parts. At the moment I'm busy with matching the MPSA18 Transistors.

BTW, if somebody needs some matched pairs, I can help. I was quite lucky with my MPSA18 package. A first quick Test showed a very low tolerance. Seems, there are a lot of pairs with 1% or even better...

regards,

Chris

meanman1964 · 7th October 2011, 05:32 PM

Thanks Rudi , Boards and trannies arrived today?

evette · 8th October 2011, 12:43 AM

Mr.Rudi, Sir can you find in your heart to have mercy on a very old man such as myself and find a pair of board for me.

Thank you, Evette

loek · 8th October 2011, 11:40 AM

Quote:

Originally Posted by meanman1964

Thanks Rudi , Boards arrived today

Also overhere arrived the red beauties.

Atilla · 8th October 2011, 05:02 PM

Thanks Rudy, the boards arrived here today.

Rudi_Ratlos · 01:48 PM

I am sorry, Joe, my old friend, I do not have any PCB left.

Maybe there is some interest in a 3rd round, but let us wait for the feedback of the ones, who are going to build the TO-3 SYMASYM, before.

I wish you all success with your build.

I soldered and tested the "Soft-Power-ON" - PCB yesterday.

http://www.abload.de/img/spo573u.jpg

"Works as designed!"

Best regards - Rudi_Ratlos

evette · 10th October 2011, 04:17 AM

Mr. Rudi Sir, My young friend. I know whoever builds This amp they will enjoy it like no other.

So I say lets start the third round

PLease

Regards, Evette

John Luckins · 10th October 2011, 10:06 PM

Hi Rudi,

My boards arrived this morning and very good they look too. Will post picies when up and running. Thanks for organising all this

John

9th October 2011, 01:21 PM	#138
Rudi_Ratlos diyAudio Member Join Date: Jun 2009 Location: Hamburg / Germany	I am sorry, Joe, my old friend, I do not have any PCB left. Maybe there is some interest in a 3rd round, but let us wait for the feedback of the ones, who are going to build the TO-3 SYMASYM, before. I wish you all success with your build. I soldered and tested the "Soft-Power-ON" - PCB yesterday. http://www.abload.de/img/spo573u.jpg "Works as designed!" Best regards - Rudi_Ratlos Last edited by Rudi_Ratlos; 9th October 2011 at 01:48 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Symasym PCB	Khron	Solid State	58	17th May 2012 07:18 AM
Troubleshooting your Symasym	anatech	Solid State	235	22nd September 2011 09:40 PM
Help with Symasym	jandr49	Solid State	6	18th September 2011 12:13 PM
Symasym 5.3	jandr49	Solid State	2	16th April 2010 03:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th October 2011, 07:47 PM	#131
curryman diyAudio Member Join Date: Aug 2010	My PCBs also arrived today Rudi: many thanks, really great work, boards look absolutely wonderful

6th October 2011, 06:15 AM	#132
Rudi_Ratlos diyAudio Member Join Date: Jun 2009 Location: Hamburg / Germany	Dear SYMASYM friends, I would appreciate very much, if you publish a picture of your build (when done) and tell us your impression of the TO-3 SYMASYM's sound. Best regards - Rudi_Ratlos

6th October 2011, 06:51 PM	#133
Leatherface diyAudio Member Join Date: Aug 2011	When I'm ready, you'll get pics. But this will take a while. I still have to buy some missing parts. At the moment I'm busy with matching the MPSA18 Transistors. BTW, if somebody needs some matched pairs, I can help. I was quite lucky with my MPSA18 package. A first quick Test showed a very low tolerance. Seems, there are a lot of pairs with 1% or even better... regards, Chris

7th October 2011, 05:32 PM	#134
meanman1964 diyAudio Member Join Date: Oct 2006 Location: Belgium the land of chocolate	Thanks Rudi , Boards and trannies arrived today?

8th October 2011, 12:43 AM	#135
evette diyAudio Member Join Date: Jun 2006	Mr.Rudi, Sir can you find in your heart to have mercy on a very old man such as myself and find a pair of board for me. Thank you, Evette

8th October 2011, 05:02 PM	#137
Atilla diyAudio Member Join Date: Jul 2008	Thanks Rudy, the boards arrived here today.

10th October 2011, 04:17 AM	#139
evette diyAudio Member Join Date: Jun 2006	Mr. Rudi Sir, My young friend. I know whoever builds This amp they will enjoy it like no other. So I say lets start the third round PLease Regards, Evette

10th October 2011, 10:06 PM	#140
John Luckins diyAudio Member Join Date: Jul 2009	Hi Rudi, My boards arrived this morning and very good they look too. Will post picies when up and running. Thanks for organising all this John