TO-3 SYMASYM

[RKH]

Board Arrival ...

in the US.

Thank you Rudi!

Ryan

 

[Rudi_Ratlos]

I have been asked several times in the past, if I still have SYMASYM - PCBs on hand. I have not.

I wonder, if the interest is big enough to start a 3rd round for the SYMASYM PCBs.
I recommend you to choose the TO-3 version, because the TO-3 sound is really exceptionally tender and yet very dynamic and deep black.
The PCBs have been already DIYed many times.

I have attached a picture of the PCBs.
I can also offer PSU-PCBs and LS Protection PCBs.

A quantity of 10 PCBs of each is the minimum amount that I can order.
If you are interested, put in your quote here.

Best regards - Rudi_Ratlos

 

[wtm111]

Count me in for 4 amp PCBs. Looks good. Also if any hard to get parts let me know For example from Mouser or digikey in the US. So far I checked the below and looks good:

http://www.mouser.com/ProductDetail/ON-Semiconductor/MJ21194G/?qs=sGAEpiMZZMsTKkj12KWLXj1C6NY4%252bpMpsau7T7vt9dk%3d

http://www.mouser.com/ProductDetail/ON-Semiconductor/MJ21193G/?qs=sGAEpiMZZMsTKkj12KWLXj1C6NY4%252bpMpWmXArQ0EJhI%3d
Thanks , Bill

 

[evette]

Then I,ll take the First 10.. Evette

 

[brianco]

And I will be pleased if you will add one more to my PM (=2S)
Many thanks,
Brian

 

[Groundloops]

Please count me in for another 10 boards.

What about the PSU and protection boards, will there be another GB?


Best regards,

Gerd (From Hamburg, too ...)

 

[Rudi_Ratlos]

I am surprised about the interest!

I will - if you are interested - offer you the auxiliary PCBs as well:

1) PSU PCB (price: 9€)



http://www.abload.de/img/psuqij57.jpg

2) Speaker Protection PCB (price: 5€)



http://www.abload.de/img/lsprot51kga.jpg

3) Soft-Power-On PCB (price: 6€)



http://www.abload.de/img/softpoweronxvkhd.jpg

The PCB prices are based upon the quantity of PCBs that I order.
I have given the prices for a quantity of 10 pcs per PCB.

I have written a comprehensive manual (the "TO3-SYMASYM Builder's Manual) with a step-by-step instruction, how to build the PCBs,
how to adjust the AMP, ..., and will send this manual to each of you.

I will give you the BoM for each PCB in a later post.

This is the current order list:



http://www.abload.de/img/image15ldv9.png

Best regards - Rudi_Ratlos

 

[brianco]

@Rudi,

Excellent. Please alter my order to x2 stereo sets of everything!

(I live in Scotland...the flag is the Irish flag(!))

 

[Rudi_Ratlos]

Excuse me, Brianco.

Best regards - Rudi

 

[meanman1964]

Rudi, going like a rocket!!!

 

[Groundloops]

Rudi, looking at your chart: Did you miss Evette's order?

 

[tome]

Hi Rudy
PSU PCB will be for 30mm caps, or 35 mm caps

 

[Rudi_Ratlos]

TOME,

the max. diameter is 35mm.

Best regards - Rudi_Ratlos

 

[harrydg]

i'll take 2 soft starts and 2 psu pcbs, please!
i already have the symasym

what/where and how much do i pay? how should i give the address?

 

[anatole51]

You can add 2 PSU, 2 Amp board, and 2 soft stars.
Thx.

 

[butch_vlad]

2 amp boards
2 spk protection
1 soft start

Thanks Rudi

 

[butch_vlad]

Rudi
Can you source the 0,22R 5W resistors for us?
Kinda hard to find the small ones in UK... unless someone knows where to get them from

Cheers
Vlad

 

[n_dori]

If it's not too late I would like to have 2 amp PCB's!

Thank you!

 

[Abraxas336]

2 x stereo for me please - 4 x Amp, 4 x PSU, 2 x Softstart, Speaker Protect x 4.

Many Thanks
Sven

PS: Deutschland

 

[Rudi_Ratlos]

Gentlemen,

this is the current order list.

I intend to leave this group-buy open until March 11th.
I will then order the PCBs.

I will give you the total price and PAYPAL-account tomorrow.

Best regards - Rudi_Ratlos

P.S. Butch: if there is interest, I will order the FUTABA emitter-resistors.
One set (4 pcs.) will cost 2.50€