Luxman D-105u Transport Identification - Page 2 - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 24th May 2006, 03:49 PM   #11
tvi is offline tvi  Australia
diyAudio Member
 
tvi's Avatar
 
Join Date: Apr 2001
Location: Moonee Ponds, Vic, Australia
The following quote is from Luxman yahoo group

Quote:
From: amtrakjackson@...
Date: Tue Jan 3, 2006 6:31 pm
Subject: D-105u CD drive change-out

Hi all,
So the other day, my beloved D-105u's motor died. Instead of swapping out the motors, I decided to take a drive out of my (spare parts) DZ-122.
So far, everything has operated with no problems. Thinking back, I was really (and am still) taking a risk, hoping all the specs are the same. Anyone see any potential issues I might have here?
Ian Smith Brooklyn, Michigan
Hope this is of some help

regards
James
  Reply With Quote
Old 26th May 2006, 08:12 AM   #12
fxbill is offline fxbill  United States
diyAudio Member
 
Join Date: May 2006
Thank you!!!!!
  Reply With Quote
Old 17th December 2006, 12:57 AM   #13
Fin is offline Fin
diyAudio Member
 
Fin's Avatar
 
Join Date: Dec 2003
Location: -
What else is inside these D-105u CD players?

I am interested to find out what decoder, filter, dac, etc it uses.
__________________
Regards
Fin
  Reply With Quote
Old 17th December 2006, 05:05 AM   #14
fxbill is offline fxbill  United States
diyAudio Member
 
Join Date: May 2006
I don't know that I can help with that, but if it is of interest to anyone else I found at least three different models of inexpensive Luxmans available for less than $30-$40 on eBay that use the exact same transport and laser assembly. It is a 15 minute job to swap them out and no adjustments are needed. Just install the several screws, plug in a couple of connectors and off you go. I bought 4 extra machines and now have a perfect unit plus three spare mechanisms. ( Of course it took getting 3 other units that I can't use as well, but it's all part of the game I guess!). I can always resell the ones with the wrong transports.
  Reply With Quote
Old 17th December 2006, 05:05 AM   #15
persuse is offline persuse  Taiwan
diyAudio Member
 
Join Date: Dec 2006
In my luxman D-105 U ,
DAC B.B PCM1701P
Digital filter NPC SM5813AP

best regards
persuse
  Reply With Quote
Old 30th September 2007, 05:52 PM   #16
ts_hm is offline ts_hm  Finland
diyAudio Member
 
Join Date: Sep 2007
Default 105 transport replacement

Quote:
Originally posted by fxbill
I don't know that I can help with that, but if it is of interest to anyone else I found at least three different models of inexpensive Luxmans available for less than $30-$40 on eBay that use the exact same transport and laser assembly. It is a 15 minute job to swap them out and no adjustments are needed. Just install the several screws, plug in a couple of connectors and off you go. I bought 4 extra machines and now have a perfect unit plus three spare mechanisms. ( Of course it took getting 3 other units that I can't use as well, but it's all part of the game I guess!). I can always resell the ones with the wrong transports.

I would greatly appreciate if you could list the models you've come across with compatible transports. I have an old girl that I'm trying to get going again, and the route you took looks sensible. Being a little out of the way (Finland), I'm trying to avoid buying a lot of players with the wrong layout. BR TS
  Reply With Quote
Old 26th October 2007, 05:32 PM   #17
DMJ3000 is offline DMJ3000  Italy
diyAudio Member
 
Join Date: Oct 2007
Quote:
Do you need a complete service manual with detailed mechanical dis/assembly?
I've got one for Lux D107u/D105u. It quite big, approx 17.5Mb, but if you have a G-mail, it should be no problem.
es44, I need very much this service manual. Can I ask you to send it to me please? It would be a big help for me.
Thanks a lot!!
  Reply With Quote
Old 26th October 2007, 10:04 PM   #18
tvi is offline tvi  Australia
diyAudio Member
 
tvi's Avatar
 
Join Date: Apr 2001
Location: Moonee Ponds, Vic, Australia
I have the full service manual as well, 8.7meg, if you stll need it whats your email address?

Regards
James
__________________
The small part of ignorance that we arrange and classify we give the name of knowledge.
Ambrose Bierce
  Reply With Quote
Old 27th October 2007, 07:23 AM   #19
DMJ3000 is offline DMJ3000  Italy
diyAudio Member
 
Join Date: Oct 2007
Thank you so much!

Now my email is available to the forum users.
  Reply With Quote
Old 19th December 2007, 07:01 PM   #20
diyAudio Member
 
Join Date: Dec 2007
Default Luxman D105u Manual

Hello! es44, or tvi could you please send me by email the service manual of luxman d105u?
My email is semidead[at]gmail[dot]com
Thank you.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Luxman LV-105u replacing outputs help! rinsbag Solid State 27 17th December 2013 09:40 PM
Help : Luxman D-105u service manual persuse Digital Source 7 30th October 2007 03:53 PM
Luxman d-105u, upgraded opamp pat allen Digital Source 4 30th December 2004 11:13 PM
Transport identification and fixes? Junkzinat0r Digital Source 4 10th May 2004 09:29 AM
Luxman transport Michel_MRS Digital Source 1 5th February 2004 02:00 PM


New To Site? Need Help?

All times are GMT. The time now is 09:13 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2