Go Back   Home > Forums > Design & Build > Construction Tips

Construction Tips Construction techniques and tips

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th November 2009, 08:57 PM   #1
diyAudio Member
 
Steve Dunlap's Avatar
 
Join Date: Sep 2008
Location: Here
Default Build your own case

This thread is for people interested in building their own nice looking case for their project. I know quite a bit has been written on this subject, but this is an attempt to consolidate enough information and links in one place to be a useful resource. I am not trying to take credit for anyone else's ideas, but it would take forever to locate all the previous information out there and give due credit. Feel free to post who you are and what your idea was if you think I am repeating your work. If you have experience with this, please contribute. As long as you work safely, there are several ways to do each step.

I will start with a link to an on line seller. This company sells metals and plastics at reasonable prices, and they will cut to size for a small fee. Look around on line to find someone that can ship to your location. I din't know if this company exports or not.

I am not affiliated with this company or other companies I link to, in any way.

Online Metal Store | Small Quantity Metal Orders | Metal Cutting, Sales & Shipping | Buy Steel, Aluminum, Copper, Brass, Stainless | Metal Product Guides at OnlineMetals.com

The idea here is to provide a procedure to make your own case with a minimum of relatively inexpensive hand tools. If you have a drill press, thats great. If you have a machine shop, thats even better. This is for the DIYers that don't. Hopefully most here will have access to a drill press, but a hand drill will work.

Some basic tools:

Combination square. A must for a clean layout and accuracy.
Enco - Guaranteed Lowest Prices on Machinery, Measuring Tools, Cutting Tools and Shop Supplies

Tap extractors. This could be handy to have.
Enco - Guaranteed Lowest Prices on Machinery, Measuring Tools, Cutting Tools and Shop Supplies

Tapping fluids. Scroll down to the bottom for one made for Al.
Enco - Guaranteed Lowest Prices on Machinery, Measuring Tools, Cutting Tools and Shop Supplies

Also, C clamps are essential. I will add others as I think of them.
  Reply With Quote
Old 20th November 2009, 07:43 PM   #2
diyAudio Member
 
Steve Dunlap's Avatar
 
Join Date: Sep 2008
Location: Here
I received the December issue of Audioxpress today and I see there is an article by Bruce Brown on building your own cases. I don't think what I'm doing here will repeat his work.

I need to say up front that I will not be building a case myself, so there will be no pictures from me. I will provide a few sketches as I go along. Hopefully, some will build something and post pictures.

The backbone of a good case is the frame that holds the large flats and heat sinks together. I like (back when I could still do this) to use 0.5" X 0.5" X 0.125" Al angel extrusion. The two readily available profiles are 6061-T6 and 6063-T52. The 6061 has rounded edges and I have not seen it smaller than 0.75" X 0.75" X 0.125". The 6063 has square edges. Another extrusion you might want to consider is square rod. It can be found in many sizes, but for our purposes here I will only show the 0.5" and the 0.25" sizes.

The 0.125" thickness can be drilled and tapped and makes very strong connection. The square rod can be drilled and tapped also giving much more thread for even more strength. I recommend using the 6061-T6 alloy of the square bare because the 6000 series of Al is much easier to drill, tap and machine in general than the softer alloys such as the 5000 series and below.

For reference, a 48" length of the 6063 angel described above is $3.69. The price per foot goes down for longer pieces (they have up to 8' lengths) but UPS charges extra for shipping the long pieces, so you come out ahead by buying the 4' pieces if you plan to cut your own. If you order that precut into, for example, 4 - 10"pieces and 4 - 2" pieces the price goes up to $8.16, before shipping. You will save money by cutting your own, but only if you already own the tools. The advantage to cutting your own is that you can miter cut the ends for cleaner looking results.

I have attached a drawing to illustrate the extrusion profiles I discussed. Ask questions or add comments. I'm sure many of you have experience with this.
Attached Files
File Type: pdf DIY Case 1.pdf (84.0 KB, 963 views)
  Reply With Quote
Old 20th November 2009, 07:59 PM   #3
diyAudio Member
 
Steve Dunlap's Avatar
 
Join Date: Sep 2008
Location: Here
I just noticed I misspelled your in the thread title. Hopefully most of you will know what I intended.

The first attachment shows what the angel could look like after drilling. You can drill the holes large enough to use bolts and nuts for the sides and bottom if you prefer, but for the top I recommend the tapped holes.

The next two attachments show the two angel profiles as they would be used. The holes shown are sized for 6-32 clear hole and tap hole. Remember, these are just suggestions, use whatever you want.
Attached Files
File Type: pdf DIY Case 2.pdf (107.0 KB, 672 views)
File Type: pdf DIY Case 3.pdf (90.9 KB, 352 views)
File Type: pdf DIY Case 5.pdf (105.6 KB, 390 views)
  Reply With Quote
Old 20th November 2009, 08:17 PM   #4
Magura is offline Magura  Denmark
diyAudio Member
 
Magura's Avatar
 
Join Date: Oct 2003
Location: Denmark, Viborg
Hi Steve,

Great idea. I've been on to making such a guide myself, as I help a lot of newbees around here. It's always the same problems they have, and mostly the same questions they ask.

To add my 2 cents:

Cutting fluid for aluminum is waste of money, simply use alcohol. In some cases it will even surpass the "real" aluminum cutting fluids.

Taps and drills should be of the plain HSS type, not plated, as the plating actually makes the tool less suitable for aluminum, due to lower sharpness. The benefits of plating, are less tool wear and lower friction. None of those are issues when cutting aluminum.
Also worth a note, is that HM (carbide) tools are also less suitable for aluminum.

When working on an aluminum sheet, to avoid scratches, simply cover it with adhesive tape. This can then be removed once all the work is done, and you will have a nice surface quality, with almost no effort.

Also a standard issue I see almost always, is that people don't calculate the cutting speed for their tooling. This often makes the difference between perfect and a mess.

When using hand tools, and a simple manual drill press, a rule of thumb is to not go past 25 meters per minute. Actually this is very low for cutting aluminum, but as the cooling and lubrication is usually pretty bad under such circumstances, 25 M/min. is a good figure to go by.
To calculate the cutting speed the formula looks like this:

Desired cutting speed, in meters per minute / tool diameter in millimeters * 1000 / Pi


Magura
__________________
Everything is possible....to do the impossible just takes a little while longer.
www.class-a-labs.com

Last edited by Magura; 20th November 2009 at 08:20 PM.
  Reply With Quote
Old 20th November 2009, 08:17 PM   #5
diyAudio Member
 
Steve Dunlap's Avatar
 
Join Date: Sep 2008
Location: Here
Hi merlin2069er,

Since your post has disappeared, I assume the files downloaded OK. If not I will re post them.
  Reply With Quote
Old 20th November 2009, 08:25 PM   #6
diyAudio Member
 
Steve Dunlap's Avatar
 
Join Date: Sep 2008
Location: Here
Hi Magura,

Thanks for contributing that info. I am a trained machinist, so I sometimes forget to give enough information to beginners when it seems so obvious to me.

Rob Southgate (RobS) sent me this link. It should be helpful also.

Untitled Document
  Reply With Quote
Old 20th November 2009, 08:45 PM   #7
diyAudio Member
 
Steve Dunlap's Avatar
 
Join Date: Sep 2008
Location: Here
Here is an example of what a side panel could look like. I have shone an example of mounting the angel flush to the edges in one, and inset the thickness of the top or bottom panel in the other. For these examples, and the previous, I am showing 0.125 thick panels. You can select the thickness that suites you. I will leave out dimensions and other unimportant details in some of the drawings because these are suggestions, not blueprints. You can use either flush, inset or mix them up to generate a construction to appeal to your own taste.

I Zipped these two together as they were each too large as PDF.
Attached Files
File Type: zip Side Example, Flush.zip (166.8 KB, 316 views)
  Reply With Quote
Old 20th November 2009, 08:50 PM   #8
Magura is offline Magura  Denmark
diyAudio Member
 
Magura's Avatar
 
Join Date: Oct 2003
Location: Denmark, Viborg
I see you're making this in Autocad, could you post those images in perspective?

The images you just posted, are not beginner friendly.



Magura
__________________
Everything is possible....to do the impossible just takes a little while longer.
www.class-a-labs.com
  Reply With Quote
Old 20th November 2009, 09:05 PM   #9
diyAudio Member
 
nigelwright7557's Avatar
 
Join Date: Apr 2008
Location: Carlisle, England
I prefer to use PC cases as they come with cut outs for mains sockets and fans mountings. For what they are the yare usually very cheap.

I use the desktop cases so I can sit a mixer on top.

Attempts at my own cases always ended up needing expensive punches etc. so I gave up.
__________________
http://www.murtonpikesystems.co.uk PCBCAD50 pcb design software.
  Reply With Quote
Old 20th November 2009, 09:41 PM   #10
diyAudio Member
 
Steve Dunlap's Avatar
 
Join Date: Sep 2008
Location: Here
Quote:
Originally Posted by Magura View Post
I see you're making this in Autocad, could you post those images in perspective?

The images you just posted, are not beginner friendly.



Magura
If you use AutoCad I can post my files. You can probably redraw them much faster than I could. I'm pretty slow these days since I can't use my hands.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What case is this? lanierb Class D 2 4th January 2007 10:14 PM
build my first full ranger,let's build another one:a small fullrange high end pc-spea then_dude Full Range 2 30th November 2005 07:54 AM
Do i need to build main supply (240v) filter?Or build power distribution? thomgun_lc Chip Amps 9 16th September 2005 09:52 AM
case theChris Parts 2 8th February 2003 08:08 PM
How to build a swell case...??? pipetman Parts 2 4th October 2002 12:22 AM


New To Site? Need Help?

All times are GMT. The time now is 07:56 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2