The Z-reg - diyAudio
Go Back   Home > Forums > Blogs > rjm

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

The Z-reg

Posted 1st February 2012 at 10:58 PM by rjm
Updated 2nd April 2012 at 02:02 AM by rjm

This is a followup of sorts to the X-reg, though there is nothing original about the circuit this time around.

It's just a Zener voltage regulator with a series pass transistor. I lifted this particular configuration from the Pionner C-21 preamplifier and re-tuned it for op amp applications. My main interest here is trying to make a small and convenient board layout.

I've used this circuit block already in the Sapphire amp and come away impressed.

The output is about 1 V less than the Zener voltage, and the input voltage should be about 3-6 V above the Zener reference voltage. I'm working here with 17 V unregulated supply and 12 V Zeners, but the values can be reconfigured easily enough for any output from 4-24 V

This is a low current circuit. If you are just powering a few op amps, no heatsinks are needed. Above 25 mA small heatsinks are a good idea. The circuit is not designed for output currents above 100 mA.
Attached Thumbnails
Click image for larger version

Name:	zreg10d-brd.png
Views:	999
Size:	17.4 KB
ID:	583   Click image for larger version

Name:	zreg10d-sch.png
Views:	666
Size:	20.2 KB
ID:	584  
Views 706 Comments 0 Email Blog Entry
Total Comments 0

Comments

 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 05:36 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2