Letting a horn group buy turn into Geddes-bashing is more than a little ridiculous and bewildering to me. Am I expected to believe free market economics don't apply to horns and waveguides? I'm excited by the opportunity of buying a big horn at a good price, please keep on topic.
I agree..for the Canadian's amongst us. If we can get smaller waveguides I can get them into Canada through my company and my travelling (Im in Mississauga, ONT monthly).
This is just if we can save $$$ shipping to one point in the US. I have a harder time with larger packages so that is why I would ask for smaller waveguides (15" max).
Iwata
Is it the look of the Iwata that you like? Closer CTC spacing to the mid? A 400Hz LeCleac'h is a better horn. Flatter FR. Lower distortion.Thanks, How do I get everyone to agree on a 600Hz Iwata?? That would reduce the size and the cost.
Is it the look of the Iwata that you like? Closer CTC spacing to the mid? A 400Hz LeCleac'h is a better horn. Flatter FR. Lower distortion.
CTC spacing and the ability to build a baffle around it. I do not like the look of LeCleac'h designs, the horns are way to big, I need a design that is 15" or less in width. I have QSC DIY builds. Flat FR, low distortion already exists above 1KHz. I just want to get a little lower and increase the 'WOW' of my speakers.
What happened to having something of a reasonable size?
This stuff doesnt fly for most people when its > 20" wide. I have about 20 DIYers that would buy a waveguide that is < 15" but no one I know is interested in monster horns that look kind of silly. Sorry.
I may also be in this category.. Looking for something to bolt to my JBL 2440 compression drivers. (2.0" throat)
Iwata @ 300 - 350Hz might be interesting. I just got the drivers and am trying to figure what to do with them for a fairly small listening room.
I may also be in this category.. Looking for something to bolt to my JBL 2440 compression drivers. (2.0" throat)
Iwata @ 300 - 350Hz might be interesting. I just got the drivers and am trying to figure what to do with them for a fairly small listening room.
A conical with a ~12"/30cm mouth with an appropriate flare rate for 350 - 400Hz and a 2.0" throat would also be of interest. It wouldn't be that big or deep. (Depth 12"/30cm or less)
A conical with a ~12"/30cm mouth with an appropriate flare rate for 350 - 400Hz and a 2.0" throat would also be of interest. It wouldn't be that big or deep. (Depth 12"/30cm or less)
What he said... I'd be on board for a pair of these.
John
Actualized list, please check. Can everyone edit below list? (have sent question to admin)
Code:
Iwata 300 (568x417x583mm with 1-2inch throat):
Titan [PL]
kevinkr [US]
MikeR? [US]
agent.5 ? [US]
doug20 ? [US]
Carl_Huff ? [US]
Trev? [CA]
dshambala ? [US] -- carrier 1 (Connecticut, NYC)
Scaper ? [US] -- carrier 2 (Ohio)
Iwata-150:
fredsonqc
LargeBande
Actualized list, please check. Can everyone edit below list? (have sent question to admin)
Code:Iwata 300 (568x417x583mm with 1-2inch throat): Titan [PL] kevinkr [US] MikeR? [US] doug20 ? [US] Carl_Huff ? [US] Trev? [CA] dshambala ? [US] -- carrier 1 (Connecticut, NYC) Scaper ? [US] -- carrier 2 (Ohio) Iwata-150: fredsonqc LargeBande agent.5 ? [US]
I am removing myself from the iwata-300 listing and adding onto the iwata-150, as I am interested in the bigger Iwata-150.
- Home
- Group Buys
- Waveguides and horns