This:
http://www.diyaudio.com/forums/multi-way/198369-tired2way-speaker-building-31.html#post2817155
Not the best pictures for seeing it but you see something at least. With some loctite I think it will stay in place. The washer is plastic, a metal tag washer could have been better.
http://www.diyaudio.com/forums/multi-way/198369-tired2way-speaker-building-31.html#post2817155
Not the best pictures for seeing it but you see something at least. With some loctite I think it will stay in place. The washer is plastic, a metal tag washer could have been better.
Last edited:
locknuts
starre
put a second nut onto your post holding thread for peace of mind
do this
tighten the primary nut on to your cabinet
snugg it down but dont over tighten it
then fit a second nut to each post and then snugg them down onto the first nut
this is another form of nut and thread locking
the bonus is that if in the future you need to do upgrades or maintenance it is a simple matter of undoing each nut
tring to get loctite to release its bond can be a serious pain in the butt!
please post some snaps of your work so far
speedie
starre
put a second nut onto your post holding thread for peace of mind
do this
tighten the primary nut on to your cabinet
snugg it down but dont over tighten it
then fit a second nut to each post and then snugg them down onto the first nut
this is another form of nut and thread locking
the bonus is that if in the future you need to do upgrades or maintenance it is a simple matter of undoing each nut
tring to get loctite to release its bond can be a serious pain in the butt!
please post some snaps of your work so far
speedie
Thanks speedie, but I have already soldered the wires so I can´t fit a second nut.
Yes, the problem with loctite is to get it off if I want to, so if using it maybe you should just use a little to be sure it is possible to remove if wanted.
I will post pictures when the cabinet is ready for drivers, should be in a few days .
Yes, the problem with loctite is to get it off if I want to, so if using it maybe you should just use a little to be sure it is possible to remove if wanted.
I will post pictures when the cabinet is ready for drivers, should be in a few days .
Ok here are some pictures, I am now waiting for the final drying and tonight I will mount drivers . The finish is not super but I think it will be ok looking.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- "Tired2way" speaker building.