Playing with capacitors, cables and similar nonsense is ideal thing for people who are not versed in electronics.. so they have something to do..
That is why it happens that someone cares about choosing a capacitor, but then use completely wrong opamp..
So you are saying that Richard, the designer, has chosen the COMPLETLY wrong opamp?
Can't you just stuff a sock in it? You are antagonistic, hostile and contribute nothing but vitriol.
Wrong opamp, wrong design and wrong power supply..So you are saying that Richard, the designer, has chosen the COMPLETLY wrong opamp?
VSPS with 60-65dB gain, AD797 and simple LM317/337 PSU plays much better.. even with Wima or Kemet capacitors..
Funny, I have both and prefer the Phonoclone 3. Listening trumps your opinion. Now, go away.
You have VSPS for MC cartridges.. I'm not sure that you read carefully..
In electronics there is no opinion, just the facts..
And they are.. OPA27 is funny chip compared to the AD797.. two opamp with great feedback distorting more than one with a smaller.. X-Reg is not a voltage stabilizer, all filtering depends on the quality of used capacitors..
Oh, not true. I have a VSPS for my HO mc cart and have my Phonoclone set to use the same cart. So I can compare them. You must be mistaken. But I am tired of you so enjoy your mental masturbations. Keep tilting at windmills. Wait a minute, you just said there IS a difference in caps. I must not have read correctly.
Last edited:
It was a figure of speech that I wanted to emphasize the bizarreness of attributing importance to such nonsense..Wait a minute, you just said there IS a difference in caps. I must not have read correctly.
Wrong opamp, wrong design and wrong power supply..
VSPS with 60-65dB gain, AD797 and simple LM317/337 PSU plays much better.. even with Wima or Kemet capacitors..
... so where is your Phono Pre-Amp design?
... also if you crave 'exactness' why are you listening to vinyl anyway?
CD's are far superior in every measurable way. Look at the output of any half decent CD spinner in any technical way you wish and it will be 'better' than my LP12.
... but it will sound worse.
I listen to music, not waveforms, jitter, distortion, wow etc.
If it sounds better, it is better.
Simples
CD's are far superior in every measurable way. Look at the output of any half decent CD spinner in any technical way you wish and it will be 'better' than my LP12.
... but it will sound worse.
I listen to music, not waveforms, jitter, distortion, wow etc.
If it sounds better, it is better.
Simples
Last edited:
are you sure?Measure the output of any half decent CD spinner in any technical way and it will be 'better'
CD is based on the computer technology that was available in the late 1970s.
It is almost pre-historic in what it can achieve and yet we find that they have introduce a least a couple of worse performing lossy compressed digital formats.
Try measuring the distortion of a 5kHz, -40dBfs CD signal.
I haven't done the comparison but I'll guess the LP performs far better than the CD.
Few months ago I posted VSPS version with simple LM317/337 power supply, 65dB gain enough for LOMC cartridges and AD797 opamp....so where is your Phono Pre-Amp design?
Few months ago I posted VSPS version with simple LM317/337 power supply, 65dB gain enough for LOMC cartridges and AD797 opamp..
NO, I asked about your DESIGN, not RJM's design that you have tweaked.
VSPS is not Richard's design, it is the basic scheme using opamp as a phono preamp, you can find it everywhere.. I'm not even tweaked them, just chose appropriate opamp..NO, I asked about your DESIGN, not RJM's design that you have tweaked.
VSPS is not Richard's design, it is the basic scheme using opamp as a phono preamp, you can find it everywhere.. I'm not even tweaked them, just chose appropriate opamp..
Whew! All that huffing, puffing and posturing and it all comes dow to choice of opamps. Well that's great. Now go away. Please.
Guys, let's keep the debate respectful, and tone of posts moderate, attack ideas, not each other. Thanks..
Check. Will do.
Should not be an issue. Done that before.So will using a 2uf cap where a 2.2uf on is called for be a problem? I found Multicaps in that capacity.
Thanks
- Home
- Source & Line
- Analogue Source
- The Phonoclone and VSPS PCB Help Desk