This it a scaled image 1/1, (Verify the G1=17.53mm=Distance between the first and last pin of the IC)it is difficult to finding the right size.
An externally hosted image should be here but it was not working when we last tested it.
If something else i'm here
Hello
thanks for your help
Do you have an image of a finished PCB?
Not yet, but when its done i'll post it here, what i've done is a prototype with simple PCB (Lines) to test and hear the IC working, i was surprised, a real pleasure, a lot of punch and clarity, the distorsion comes very lately and the sound stil good, good overall behaviour, Sincerely a good chip thats sound great. But what i've learned is that the Heatsink should be big, thats and after some tests with different piece of aluminium, i finally used a radiator for PC Processor (cut in two) and added to it a little fan who works silently with 5 volts. The major problems are the good sizing of heatsink thats why the use of a fan improve its size and make it more compact. The local electronic shop who makes also PCBs are closed with the holydays but when open again i will post some images of my PCB.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- tda 7294 power amp