it's on the way.Hi Scafas,
can I have 2 pcb + shipping to France ?
Could you PM me your information for payement ?
Thank you
Aymerick
thanks
pcb snl
lista pcb
sorry , other infoone pcb is stereo and you can use with step-up trasformer for mc stylus.
13eu is for one pcb incluse ship to 73096 USA
lista pcb
sorry ...you have a PM.Hi,
I will take 1.
Regards,
Morten
thanks
thank for buy..one pcb is stereo and you can use with step-up trasformer for mc stylus.
13eu is for one pcb incluse ship to 73096 USA
5 pz. available
Questions ;-).
I want to bypass the power supply used on the schematics and would like to use my own 18v dual power supply.
For this, I do not know if I have to bypass T19/20 and R16/20 too?
Could someone help me understand if T19/20 are needed for the RIAA stage or for the PS ?
Best,
https://image.noelshack.com/fichier...-super-low-noise-preamp-circuit-souplesse.jpg
I want to bypass the power supply used on the schematics and would like to use my own 18v dual power supply.
For this, I do not know if I have to bypass T19/20 and R16/20 too?
Could someone help me understand if T19/20 are needed for the RIAA stage or for the PS ?
Best,
https://image.noelshack.com/fichier...-super-low-noise-preamp-circuit-souplesse.jpg
Questions ;-).
I want to bypass the power supply used on the schematics and would like to use my own 18v dual power supply.
For this, I do not know if I have to bypass T19/20 and R16/20 too?
Could someone help me understand if T19/20 are needed for the RIAA stage or for the PS ?
Best,
https://image.noelshack.com/fichier...-super-low-noise-preamp-circuit-souplesse.jpg
Hi,
you can bypass T18/20 and R16/20 and C9/10 (called gyrotor in the original article), they are used for noise reducction on the power supply, or simply bypass only the ps regulator (IC1/2, C11/12 and C13/14) and check the result for noise. Depends how good your own +/- 18 V PS is, regarding noise.
BR
Günni.
Last edited:
Thank you GünniHi,
you can bypass T18/20 and R16/20 and C9/10 (called gyrotor in the original article), they are used for noise reducction on the power supply, or simply bypass only the ps regulator (IC1/2, C11/12 and C13/14) and check the result for noise. Depends how good your own +/- 18 V PS is, regarding noise.
BR
Günni.
I saw you have JLH 1969 in your list. Still available?
hi , yes i haveHi
If you still have the pcb's i would like 2. Are the pcb's still available?
Don
i send you a PM.
thank
yes , i have one for you.hi, if is still available pls send me 1x pcb
i send you a PM.
yes, i send you a PMHello,
do you still have pcb`s?
THANK
snl elektor phono preamplifier pcb
tks
the pcb is on the way to youhi, if is still available pls send me 1x pcb
tks
can you give me an address for ship the pcb ?Hello,
do you still have pcb`s?
thank
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- supa phono preamplifier pcb