Banned
Joined 2002
Ok im going to attempt to build another pair of speakers but take more time into proper values and box sizes and proper calculations and a decent crossover if i have to.
Can any one suggest some software to run on pc/mac that I can use to play with box sizes before building the boxes ? I’m making a 2 way book shelf speaker with 91db efficient drivers both drivers are 91db efficient. ID like to go ported if I can. But sealed is ok. Later on ill build a pair of subwoofers to throw down that extra little kick..
Maybe a pair of sealed / ported 8” subwoofers nothing over powering but something to give what these speakers wont.
Drivers are Davis 6.5"
and a seas 1" soft dome
Both were expensive drivers and now i want to get down to building them into a book shelf type enclosure.
I can post drivers information if some one wants it.
Thanks
Jase
Can any one suggest some software to run on pc/mac that I can use to play with box sizes before building the boxes ? I’m making a 2 way book shelf speaker with 91db efficient drivers both drivers are 91db efficient. ID like to go ported if I can. But sealed is ok. Later on ill build a pair of subwoofers to throw down that extra little kick..
Maybe a pair of sealed / ported 8” subwoofers nothing over powering but something to give what these speakers wont.
Drivers are Davis 6.5"
and a seas 1" soft dome
Both were expensive drivers and now i want to get down to building them into a book shelf type enclosure.
I can post drivers information if some one wants it.
Thanks
Jase
Banned
Joined 2002
pinkmouse said:If you have access to Excell, then Unibox is by far the best free box designer.
Do you have a link to unibox ?
J'
jleaman said:
Do you have a link to unibox ?
J'
Google is your friend
run: unibox, software
and it will end up atop of the list.
EDIT:
that's funny, i went to check out the unibox software myself, and in the meanwhile Pinkmouse had already replied with the exact same phrase as I did.
Banned
Joined 2002
works on osx after enabling macro's but it ask's you that when you open the document.
http://www.jasesspace.com/images/screen.png
J'
http://www.jasesspace.com/images/screen.png
J'
http://www.pvconsultants.com/audio/frdgroup.htm
I'm also rather fond of the "Edge" interface (EXTREMELY easy to use) - and its likely that the Basta is very similar, but it will cost you.
http://www.tolvan.com/basta/
Without actual measurements however, you likely won't produce something as good as it could be.
At no cost think SpeakerWorkshop.. at reasonable cost think SoundEasy.
I'm also rather fond of the "Edge" interface (EXTREMELY easy to use) - and its likely that the Basta is very similar, but it will cost you.
http://www.tolvan.com/basta/
Without actual measurements however, you likely won't produce something as good as it could be.
At no cost think SpeakerWorkshop.. at reasonable cost think SoundEasy.
Ity probably does, but I can run macro's no problem. I have a crossover calc that runs macros OK.
I had this problem before, which was never cured, even with his email help. That's what made me search for and find WinISD. I was just hoping it was fixed by now.
** edit **
Pinkmouse - 4.03 was the original one I had trouble with.
Thanks!
I had this problem before, which was never cured, even with his email help. That's what made me search for and find WinISD. I was just hoping it was fixed by now.
** edit **
Pinkmouse - 4.03 was the original one I had trouble with.
http://www.pvconsultants.com/audio/frdgroup.htm
Thanks!
pinkmouse said:Well, I just downloaded 4.07 and it runs fine. Have you tried re-installing Office, and or Windows?
Windows is on the wife's box, so I don't want to touch it as long as her games run OK
Thanks for the help.
Geek said:
Windows is on the wife's box, so I don't want to touch it as long as her games run OK
Thanks for the help.
what's with jbl thingie I sent you ages ago?
Zen Mod said:what's with jbl thingie I sent you ages ago?
Got wiped along with everything id D:\ in a software crash ages ago
Banned
Joined 2002
Geek said:
Got wiped along with everything id D:\ in a software crash ages ago
You shold be doing a back up every few weeks. DVD burners are like 40$ a pack of 50 is 15$ Comooon it sooo cheap now.
Any way's Planet10 has done up some Drawings. To help with box design's and other things. I'll post them soon ofthe re-making's
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Speaker Software