Pins 5 and 6 are reversed from the information I have. I'll try to find something that matches what you have.
Ok perry. Do you have an idea what may causes of protection? I am planning to bypass the protection, which pins do i need to short? Thank you
Last edited:
On similar amps, that half of the comparator is fed signals from the DC offset, over-voltage and over-current.
Shorting 3-4 on the comparator will defeat the protection for that section.
I tried it before i asked your help but my problem is the amp is muted or the audio board is shutdown although its powered up.
By the way thank you so much!
The shorts from 2-3 on the driver ICs shut the driver ICs down which mutes the amp.
Yes, even without shorting the audio driver the amp is muted. Anyway i can manage now..i learned to your procedure.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.