Wrong picture in your shop ;-)RE2207L, longer version of RE2207 with 308mm length
Ideal for small amp/preamp and DAC
Wrong picture in your shop ;-)
Ohhhh... sorry. It's corrected now.
Here it is:
http://www.siliconray.com/audio-amateur/enclosure-chasis/re2207l-215x70x308-aluminum-enclosure.html
Last edited:
Ohhhh... sorry. It's corrected now.
Here it is:
RE2207L 215x70x308 Aluminum Enclosure - Boards | Kits | Components | Modules | Tools
Do you offer it with the same drilled front panel as per 22071 (pot knob and switch)?
Ray,
You are killing me... I had something else already planned (and partially built) for my three projects and now I have to re-decide once again on how to use one of your these enclosures or add one more project. They are reasonably priced and look high quality (hmmmmm... maybe if I use these no one will notice my ugly point to point wiring jobs underneath).
*shakes angry little fist towards Ray.
Take care Ray!
You are killing me... I had something else already planned (and partially built) for my three projects and now I have to re-decide once again on how to use one of your these enclosures or add one more project. They are reasonably priced and look high quality (hmmmmm... maybe if I use these no one will notice my ugly point to point wiring jobs underneath).
*shakes angry little fist towards Ray.
Take care Ray!
Here it is: RE2207LK, comes with knob and connectors
It seems strange to me. Is it a power amp with a volume knob but only 1 input? It looks very nicely finished in the photos.
Yes it's original designed for a class D amp with only one input, which have been sold about 500.
It seems strange to me. Is it a power amp with a volume knob but only 1 input? It looks very nicely finished in the photos.
Sorry...RE4310W is manufactured by custom demand, don't have this modle by hand. Another smaller enclosure which has the same finish is RE3222W, photos attached
RE3222W share most parts with RE4310W, such as the arc, the side wall, the internal brackets. They have the same finish and construction. The only difference is the dimension.
RE3222W share most parts with RE4310W, such as the arc, the side wall, the internal brackets. They have the same finish and construction. The only difference is the dimension.
Excellent cases and the cost is good
Can you post some nice(er) pictures of RE4310W please?
Thanks
Attachments
Hi,
Thought I would share some photos of the enclosures I bought from SiliconRay whilst I was in Beijing, Mike was kind enough to deliver them in person.
The photos are not the best but better than nothing...
I had to take the boxes appart so I could get them in my suitcase, most of the boxes when packed flat could fit inside the steel enclosure, this kept them safe, the bits that didnt fit were some front panels and a heatsink.
I also picked up a JLH headphone amp kit.
Thought I would share some photos of the enclosures I bought from SiliconRay whilst I was in Beijing, Mike was kind enough to deliver them in person.
The photos are not the best but better than nothing...
I had to take the boxes appart so I could get them in my suitcase, most of the boxes when packed flat could fit inside the steel enclosure, this kept them safe, the bits that didnt fit were some front panels and a heatsink.
I also picked up a JLH headphone amp kit.
Attachments
-
P1000962.JPG93.8 KB · Views: 204
-
P1000960.JPG78.6 KB · Views: 212
-
P1000958.JPG120.4 KB · Views: 205
-
P1000955.JPG101 KB · Views: 194
-
P1000954.JPG107 KB · Views: 192
-
P1000953.JPG97 KB · Views: 188
-
P1000952.JPG99.6 KB · Views: 180
-
P1000951.JPG102.7 KB · Views: 159
-
P1000963.JPG91.8 KB · Views: 186
Last edited:
Hi,
Mike was kind enough to deliver them in person.
So "Mike" does exist? Did you meet "Jane" too?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- More Vendors...
- Siliconray Online Electronics Store
- Some enclosures and chasises we made