I'm also looking for these drawings
Hi!
I am actually a newbie here but I am very interested by the Solo 206.
I already bought a pair of Fe-206 and now looking for the solo cabinet drawings.
As I'm new here, I can't email directly to Tony Gee. So if someone could
send me these drawing, it would be very nice.
I let you the following adress : zgregz"at"gmail.com
Thanks for your help.
Hi!
I am actually a newbie here but I am very interested by the Solo 206.
I already bought a pair of Fe-206 and now looking for the solo cabinet drawings.
As I'm new here, I can't email directly to Tony Gee. So if someone could
send me these drawing, it would be very nice.
I let you the following adress : zgregz"at"gmail.com
Thanks for your help.
Hello
Can I use a Mordaunt Short, DSB 208 woofer to do the Solo206 horn loudspeaker ?
I have a pair of those DSB 208 woofer.
I would use a separated tweeter.
Here's the DSB 208 woofer ;
http://www.eastmarinedrive.com/audio/images/ms/dsb1.jpg
And the spec of the Mordaunt Short Peageant using the DSB 208 woofer, but I don't of have the spec
the DSB 208 woofer alone.
http://www.eastmarinedrive.com/audio/images/ms/pagdata.jpg
Btw, anyone do have the spec the DSB 208 woofer alone ?
Thank
Gaetan
Can I use a Mordaunt Short, DSB 208 woofer to do the Solo206 horn loudspeaker ?
I have a pair of those DSB 208 woofer.
I would use a separated tweeter.
Here's the DSB 208 woofer ;
http://www.eastmarinedrive.com/audio/images/ms/dsb1.jpg
And the spec of the Mordaunt Short Peageant using the DSB 208 woofer, but I don't of have the spec
the DSB 208 woofer alone.
http://www.eastmarinedrive.com/audio/images/ms/pagdata.jpg
Btw, anyone do have the spec the DSB 208 woofer alone ?
Thank
Gaetan
gaetan8888 said:Hello
Can I use a Mordaunt Short, DSB 208 woofer to do the Solo206 horn loudspeaker ?
I have a pair of those DSB 208 woofer.
I would use a separated tweeter.
Here's the DSB 208 woofer ;
http://www.eastmarinedrive.com/audio/images/ms/dsb1.jpg
And the spec of the Mordaunt Short Peageant using the DSB 208 woofer, but I don't of have the spec
the DSB 208 woofer alone.
http://www.eastmarinedrive.com/audio/images/ms/pagdata.jpg
Btw, anyone do have the spec the DSB 208 woofer alone ?
Thank
Gaetan
Hi
I just found two Dynaudio 17W-75 woofer, can I use them for that horn loudspeaker ?
Gaetan
doug_olitsky said:here's a .zip w/ 206 plans in the dxf format.
get a free viewer online
enjoy
Thank you very much for the dxf file. Please verify that all angle details are visible in the drawing. Only a 45" angle is visible to me in piece #16.
Sorry about that.... I forgot to turn on the layer w/ the angles
here is my final revised drawing that I used to build with
Based on 24mm Fin Birch
Its in the CadKey format (.prt)
you can get the free Kubotek Spectrum Lite 8.0.1 here...
Kubotek Spectrum Lite Cadkey & KeyCreator Viewer
My Solo-206 build
here is my final revised drawing that I used to build with
Based on 24mm Fin Birch
Its in the CadKey format (.prt)
you can get the free Kubotek Spectrum Lite 8.0.1 here...
Kubotek Spectrum Lite Cadkey & KeyCreator Viewer
My Solo-206 build
Attachments
Tere,
I'm planning to buy Fostex FE206E drivers.
According to Fostex, FE206Es are built for back loaded horn type of enclosure.
Fostex proposal is We are sorry - the page cannot be found.
But those are too big ... will not look good in my living room.
I know about http://home.hetnet.nl/~geenius/Solo206.html.
Can I buy or get exact drawings of Solo 206 cabinets ?
Or maybe there is more horns with exact drawings for FE206E ?
Thank You
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Mr. Jianping,
Are those enclosures in your picture for sale somewhere? I'd like to try out horns but I'm not much of a wood worker. Any direction you could offer would be great. Thank you.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
While amusing in how it makes building a horn simpler, I also think that it is a huge waste of material.
Also, if CNC is used, I wonder if there are not better, elaborate structures that are really difficult to make otherwise that could be created with CNC, like for example trying for a circular cross section that is folded.
Also, if CNC is used, I wonder if there are not better, elaborate structures that are really difficult to make otherwise that could be created with CNC, like for example trying for a circular cross section that is folded.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Full Range
- Solo 206 drawings