What will it be like?
Probably like this when SIT transistors are gone
Attachments
Probably like this when SIT transistors are gone
But what think is that Nelson has some 2SK82s along with 300 mounting brackets for the kits?
We will see..
I wandered by Renohifi's site and saw this:
"The waiting lists for SIT-3's is now closed and this amp is considered Sold-Out."
I guess one shouldn't be surprised.
Should be: will not stop production, rest assured
I wandered by Renohifi's site and saw this:
"The waiting lists for SIT-3's is now closed and this amp is considered Sold-Out."
I guess one shouldn't be surprised.
pras , it will be some new model
You should know better than I do: Uncle Nelson pass
...
It's a beautiful amplifier.
Dennis
Hi Dennis,
Would like to know how Mr Pass terminated the Cinemag transformer.
In the DefiSit schéma there is no resistor across the 1:4 auto-transformer.
Thanks
Sit-3 is for Sissies
Pascal - that's simple ; in exact case , Papa didnt saw any need to linearise xformer's transfer characteristic , contrary to , say , Edcor in M2
so , driven with that generator ( complementary JFet buffer) and loaded with that load ( biasing circuit of OS ) , there is no need for altering transfer characteristic of Cinemag xformer
Pascal - that's simple ; in exact case , Papa didnt saw any need to linearise xformer's transfer characteristic , contrary to , say , Edcor in M2
so , driven with that generator ( complementary JFet buffer) and loaded with that load ( biasing circuit of OS ) , there is no need for altering transfer characteristic of Cinemag xformer
I spent a bit of time with a SIT-3 Saturday
Lucky you. I'm not jealous at all.
Hi Dennis,
Would like to know how Mr Pass terminated the Cinemag transformer.
In the DefiSit schéma there is no resistor across the 1:4 auto-transformer.
Thanks
It looks the same to me looking at the pictures ...
Attachments
@ Miko
you have good eyes ..... and fast m......outh
how you can tell ...... maybe only counting on Papa's honesty and integrity - to always place all parts on top of pcbs , and not hide parts in schematic ........
anyhow , that resistor ( or RC) is trivial thingie for Pa , certainly not worthy of playing games with industrial espionage agents
you have good eyes ..... and fast m......outh
how you can tell ...... maybe only counting on Papa's honesty and integrity - to always place all parts on top of pcbs , and not hide parts in schematic ........
anyhow , that resistor ( or RC) is trivial thingie for Pa , certainly not worthy of playing games with industrial espionage agents
There is no termination. Effectively it goes straight into the Gates and the
only loads are the Gates and Zener protection capacitance.
Thank you Mr Pass and et al. for valuable information.
Kind regards
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- SIT-3