They look awesome I m drooling all over my keyboard
Quick question. On the mounted/tested option, will the mini-regs come pre-populated and installed?
Thanks dimkasta ! The final boards will look even better.
Mini-regs are optional. You may populate yourself, ask me to get the boards populated, or you may want to use tentlabs, W.Jung, alw, salas etc. as well.
Regards,
Tibi
Thanks dimkasta ! The final boards will look even better.
Mini-regs are optional. You may populate yourself, ask me to get the boards populated, or you may want to use tentlabs, W.Jung, alw, salas etc. as well.
Regards,
Tibi
Cool
Will there be an option on the GB sheet to state our interest in those? Will there be extra cost for them?
Go to first page of this thread. Click on the spreadsheet access and join the fun. Cheers.
Hi, I'm interested too, how do I get on the GB?
Thanks,
Ales
+1 on the I2S output question...
I was going to ask and see that Rick already did that. There was no ability to tap I2S from the original Shigaclone. Can that be made available on this one?
Greg in Mississippi
For those of us who have discarded our SPDIF input dac?
I was going to ask and see that Rick already did that. There was no ability to tap I2S from the original Shigaclone. Can that be made available on this one?
Greg in Mississippi
I was going to ask and see that Rick already did that. There was no ability to tap I2S from the original Shigaclone. Can that be made available on this one?
Greg in Mississippi
LC78601 DSP chip have only S/PDIF output.
Regards,
Tibi
It will include:
- main board
- power supply
- display and control board
- low noise shielded trafo
- CD mechanic
- Al non-magnetic CD puck
- IR remote control
I also consider to redesign the PCB, to change connectors and improve layout. So, this will be a Shiga MKII version.
Regards,
Tibi
Hi Tibi
I´d be interested in Shigaclone 2013 GB
I got some spare parts from early 2008 version, The PS trafo is one I could take:
http://www.diyaudio.com/forums/digi...d-transport-shigaclone-story.html#post1468036
Is it suitable?
Thanks
JC
Last edited:
Hi Tibi
I´d be interested in Shigaclone 2013 GB
I got some spare parts from early 2008 version, The PS trafo is one I could take:
http://www.diyaudio.com/forums/digi...d-transport-shigaclone-story.html#post1468036
Is it suitable?
Thanks
JC
It will fit perfectly on Shiga MKII as well.
Regards,
Tibi
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Shigaclone new GB 2013