What is this 'overkill' that you speak of??
The "club" must be one of those holistic bookstore/vegan tea houses.
Post # 47 has simulated comparisons of various drivers:So from what i can see the B&C 21DS115 is one of the best drivers for the SKhorn, correct? (not including ipal). Is the 4ohm or 8ohm version better? wired in parallel or series. Sorry for the dumb question :/
want to build 2 of these in the summer (UK)
18sw115-8, 21sw152-4, 21ds115-8, 18xl1800-8, 21Ipal-1.
Generally, the impedance does not make a driver better or worse, but may be more appropriate for the amplification chosen.
21nlw9601, 21ds115 or SAN214.50 are all good options.
Thank you 😁 and would you recommend wiring in series or parallel?
Hey Josh.
Amazing designs man! I've built a pair of th18s and they perform quite well but looking for the next project to sink my teeth into. Looks like 18" drivers will do pretty well in the skhorn but just wondering if the cab size will need to stay the same with 18 drivers?
Amazing designs man! I've built a pair of th18s and they perform quite well but looking for the next project to sink my teeth into. Looks like 18" drivers will do pretty well in the skhorn but just wondering if the cab size will need to stay the same with 18 drivers?
If you don't find complete plans, should be able to complete them from the basic plans in post #11. The Skhorn is 24"x32"x54", pictures of the bracing are shown in the early posts.Hello Josh, is your plan still available ?
Last edited:
Link to your build?
Wasn't sure if you meant me or previous poster but I will post a link or pics in a few weeks when project is under way.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- Ricci's Skhorn Subwoofer