You got yours for free
You got yours for free, that wouldnt surprise me. things in the US seem to be a lot cheaper as far as second hand audio, not surprising concidering the US is ten times the size of Australia. I looked into buying from US but a 22kg amp kinda costs a lot inpostage!! lol.
Anyway please contact me about capacitors.
Thankyou
Daniel
You got yours for free, that wouldnt surprise me. things in the US seem to be a lot cheaper as far as second hand audio, not surprising concidering the US is ten times the size of Australia. I looked into buying from US but a 22kg amp kinda costs a lot inpostage!! lol.
Anyway please contact me about capacitors.
Thankyou
Daniel
Last edited by a moderator:
Sorry I didn't realize I had some weird email in my profile.....
zerofeedback@juno.com
Also I have all the parts that were in the amp still, I don't know what works, what doesn't. But I have all the boards and stuff.
zerofeedback@juno.com
Also I have all the parts that were in the amp still, I don't know what works, what doesn't. But I have all the boards and stuff.
Parts i need
If anyone anywhere can give me some or any of these parts please contact me
Transisitors:
2sa909 X 3
2Sc1586 X 1
Nec D381 2m81c - or similiar - X2
Nec B536 2m8Xc - or similiar - X1
Resistors:
25mA - 390ohm
100mA 68ohm
30mA 470ohm
150mA 22 ohm
That shall be all for know. I can pick up the rest of the parts from the local shop.
If anyone anywhere can give me some or any of these parts please contact me
Transisitors:
2sa909 X 3
2Sc1586 X 1
Nec D381 2m81c - or similiar - X2
Nec B536 2m8Xc - or similiar - X1
Resistors:
25mA - 390ohm
100mA 68ohm
30mA 470ohm
150mA 22 ohm
That shall be all for know. I can pick up the rest of the parts from the local shop.
Last edited by a moderator:
Re: Parts i need
What does the bold mean?
What are the NEC's...what kind of device, is it a transistor?
Also what do you mean by Current rated resistors? Similar to a Wattage rating?
priscared said:Transisitors:
2sa909 X 3
2Sc1586 X 1
Nec D381 2m81c - or similiar - X2
Nec B536 2m8Xc - or similiar - X1
Resistors:
25mA - 390ohm
100mA 68ohm
30mA 470ohm
150mA 22 ohm
What does the bold mean?
What are the NEC's...what kind of device, is it a transistor?
Also what do you mean by Current rated resistors? Similar to a Wattage rating?
The NEC transistors
There should be a blue transistor and two black ones. Both NEC and mounted on heatsinks (well they would have been) there should also be another greenish blue transistor, smaller than the others with A682-3 written on it. It is not NEC as far as i can tell.
Thankyou
Daniel
Anyone tell me what ECB means, Emitter COllectore and What?? Bridge?
Thanks
Daniel
There should be a blue transistor and two black ones. Both NEC and mounted on heatsinks (well they would have been) there should also be another greenish blue transistor, smaller than the others with A682-3 written on it. It is not NEC as far as i can tell.
Thankyou
Daniel
Anyone tell me what ECB means, Emitter COllectore and What?? Bridge?
Thanks
Daniel
base
heres a miscallenous image to give you and idea
and another
heres a miscallenous image to give you and idea
An externally hosted image should be here but it was not working when we last tested it.
and another
An externally hosted image should be here but it was not working when we last tested it.
amp for sale
Ok, my amp is for sale.
230w 8ohm rms continuois sine wave input. One channel is broken. One supply cap will need replacing.
Yamaha guy in bendigo said on average the broken channel in this amp cost $150 to repair. JKL capacitors quoted me around $150 for 2 new supply caps including postage (depends on aussie dollar of course) I no longer need this as i got myself a soundking amp and i am now working almost 50 hours a week so yeah... There is NO glue on the caps!! It is all there, the case looks like it woulda new. I am after $200 ONO. DOnt hesitate to ask questions.
Daniel
Ok, my amp is for sale.
230w 8ohm rms continuois sine wave input. One channel is broken. One supply cap will need replacing.
Yamaha guy in bendigo said on average the broken channel in this amp cost $150 to repair. JKL capacitors quoted me around $150 for 2 new supply caps including postage (depends on aussie dollar of course) I no longer need this as i got myself a soundking amp and i am now working almost 50 hours a week so yeah... There is NO glue on the caps!! It is all there, the case looks like it woulda new. I am after $200 ONO. DOnt hesitate to ask questions.
Daniel
Last edited by a moderator:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- repairing capacitors