This is my very old amplifier which I connected to see if it's still working after so many years. I connected with small speakers just to test it. Next week I will brink back his old speakers to to see. Finlay I understand that the tape monitor switch and the input selector are having bad contacts when moving them the sound is coming back. I guess need to open and clean up.. Its a Sansui AU666
Deoxit. Thanks I take note.
I too, have issues with an old tuner/receiver not used for many years.
It had all the dial glass face lamps dead, all 5 of them.
Then twitching the source selector, the FM interstation muting, that was working, failed. Now it switches off the FM.
That' s life of old stuff...old but good.
I downloaded the service manual, bought a contact cleaner can, saw it is from WD40.
I'de like to know whether that one is good.
Well, I am ready for an opportunity to open it again.
I too, have issues with an old tuner/receiver not used for many years.
It had all the dial glass face lamps dead, all 5 of them.
Then twitching the source selector, the FM interstation muting, that was working, failed. Now it switches off the FM.
That' s life of old stuff...old but good.
I downloaded the service manual, bought a contact cleaner can, saw it is from WD40.
I'de like to know whether that one is good.
Well, I am ready for an opportunity to open it again.
@mchambin.
If it is proper contact cleaner made by the manufacturers of WD40 then it should be OK.
If it is the product WD40 itself, then some experts do not recommend using it on certain types of potentiometers for fear of damaging the tracks.
However, I have used WD40 successfully on both potentiometers and selector switches on vintage amplifiers.
If it is proper contact cleaner made by the manufacturers of WD40 then it should be OK.
If it is the product WD40 itself, then some experts do not recommend using it on certain types of potentiometers for fear of damaging the tracks.
However, I have used WD40 successfully on both potentiometers and selector switches on vintage amplifiers.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- question about input sensitivity