The PRP/Mosfets/Keratherm are ready to hand over to Greg to ship along with the Fukus.
Since the CRC is to replace the regulator initially, I suppose there will be another Fuku GB. If so, this may impact the shipment, too. The good news is that the Fuku's for the CRC don't need matching.
Since the CRC is to replace the regulator initially, I suppose there will be another Fuku GB. If so, this may impact the shipment, too. The good news is that the Fuku's for the CRC don't need matching.
> Since the CRC is to replace the regulator initially, I suppose there will be another Fuku GB.
Not for the case subscribers. They get them for free, paid by us.
> If so, this may impact the shipment, too.
The CRC Fuku's have already been sent to the regional distributors earlier this week.
> The good news is that the Fuku's for the CRC don't need matching.
That is partly correct.
You get a set of 24, and should group them in 4 groups in such a way that each group of 6 gives the same equivalent R of 0R66.
(Each group consists of 2 sets of triples in parallel which are then connected in series to give 0R66.)
Patrick
Not for the case subscribers. They get them for free, paid by us.
> If so, this may impact the shipment, too.
The CRC Fuku's have already been sent to the regional distributors earlier this week.
> The good news is that the Fuku's for the CRC don't need matching.
That is partly correct.
You get a set of 24, and should group them in 4 groups in such a way that each group of 6 gives the same equivalent R of 0R66.
(Each group consists of 2 sets of triples in parallel which are then connected in series to give 0R66.)
Patrick
....
The CRC Fuku's have already been sent to the regional distributors earlier this week.
....
Case distributors?
Then we will beSounds like a plan Fred! I'll let you know when they arrive.
I do not recall you have subscribed for a case ?
Patrick
i didnt, i'm just trying to work out whats happening with mine, since there has only been mention of those involved in the GB, or those in north america. i thought perhaps an attempt to save on shipping was made by fanning them out to the regional distributors, but now i'm just confused.
Greg help!!
The MPC74 resistors (1R0) under discussion in post 262 & 266 refer only to the 1R CRC resistors for the case subscribers they get for free. Those have been shipped to the case distributors.
For the GB MPC74s (0R22, 0R47, ...), please refer to posts 259, 269, 270.
Patrick
For the GB MPC74s (0R22, 0R47, ...), please refer to posts 259, 269, 270.
Patrick
Last edited:
I think Jeremy was asking that he was not in the case GB or PRP GB, why he couldn't get his Fuku 0R22 and 0R47 shipped now. His question was probably to Greg.
thats correct, i was talking to Greg
Flg should be finishing the matching of the 0R47 resistors this weekend, and then he will send them along to me. Once I have received them, I will send them out to the distributors who shall pass them along your way.
I know that the resistor matching has taken a while, but it is a huge undertaking (time wise) to match 1000 power resistors under load. Things have come up with our day jobs that have taken away much of spare time as well. I really appreciate everyone's patience, and you should have your power resistors in time for the delivery of the cases/beta boards.
I know that the resistor matching has taken a while, but it is a huge undertaking (time wise) to match 1000 power resistors under load. Things have come up with our day jobs that have taken away much of spare time as well. I really appreciate everyone's patience, and you should have your power resistors in time for the delivery of the cases/beta boards.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Potential MPC74 Fukushima resistors GB for EUVL's FX5