Potential GB for Jensen transformers for Sony VFET project

Soundhappy · 2014-03-30 2:41 pm

RINNAV · 2014-04-01 4:55 am

rinnav - 2 - USA...

Thanks for the effort!

dady · 2014-04-01 8:19 am

The pleasure of serve in a common form of think.
We are 32.

Soundhappy · 2014-04-01 9:00 am

Cobra2 · 2014-04-01 9:52 am

neoinc · 2014-04-04 4:34 pm

Soundhappy · 2014-04-05 12:09 pm

First Option|Wire

The JT-112-LCF (which is marked JT-112-L on the tape) orginal choice of Mr Pass known actually name is the
JT-123-FLCF have bandwidth <450kHz
This is wire termination , easy install fixation with screws on PCB or something else

Second option|PCB

JT-112 FLPCH bandwidth is shorter 270 kHz but ideal for PCB because have pins termination.

This is a big question and all diyers must have make good choice for personal needs.
Have a nice day

Soundhappy · 2014-04-05 12:10 pm

JT-112 FLPCH second option PCB picture

dady · 2014-04-05 12:39 pm

Hi Sound, one question:
Do speak we about of pbc?
I guess the election of Point to point.
Thanks again for your findings.
Bonsoir

dady · 2014-04-05 12:41 pm

Dear Dennis:
Did you contact Jensen co?
You not consider that we are enough people for a GB?
Best Regards

Soundhappy · 2014-04-05 1:15 pm

dady said:
Hi Sound, one question:
Do speak we about of pbc?
I guess the election of Point to point.
Thanks again for your findings.
Bonsoir

Hi Dady
PCB ( printed circuit board )
JT-123-FLCF is universal one can be put in point- to -point or PCB with screws have bandwidth <450kHz

JT-112 FLPCH ideal for PCB have pins termination look nice
have bandwith shorter 270kHz

I am for JT-123-FLCF more freedom and bandwith +1

We must make democratic vote for Diyers GB choice

Have fun !

dady · 2014-04-05 2:42 pm

The dyslexia and the Alzheimer is killing myself.
Sorry I try to mean PCB.
I want the transformers for start soon. I must to take a relax day.
Best Regards friend

Soundhappy · 2014-04-05 11:15 pm

Group Buys choice of Jensen transformer version ?

*****Attention Important Message*****

All diyers is asked to give personal opinions and clarify any doubt about specyfications of Jensens and make choice for final Group Buy

This is two options :

wire termination version bandwith <450kHz :test condition 1:2 ???
pins termination version bandwith 270kHz :test condition 1:1 ???

Make Your choice please send as informations !

My is wire options today.
Greetings

Lazybutt · 2014-04-06 2:18 am

I prefer wire termination , although I'm not 100% against pin version

For spec , can't we contact Jensen and try to clarify it for same configuration ?

dady · 2014-04-06 8:27 am

Mine is wired.

Dr_Strangelove · 2014-04-06 3:18 pm

dr.strangelove3 - 2 pieces - Netherlands

mctavish · 2014-04-06 3:24 pm

From my experience with tube gear it is always a good idea to be able to move/re-orient an input trans. for lowest noise/ lowest hum pickup...

I vote for wires!

brian.goodman · 2014-04-06 3:49 pm

+1 for wired

I vote for wired based on bandwidth & ability to reposition.

Brian

Soundhappy · 2014-04-06 6:11 pm

dady · 2014-04-06 9:20 pm

Sound tu est très heureux mais les transformateurs....
Next year we going to install into the chassis.....
Bonne nuit

Potential GB for Jensen transformers for Sony VFET project

Member

Member

Member

Member

Member

Member

Member

Attachments

Member

Attachments

Member

Member

Member

Attachments

Member

Member

Member

Member

Member

Member

Member

Member

Member