steenoe said:ZM & Spavleski, great job
Where can we order, I wanna try some of that lightnin' stuff.
Nice little supply for the buffer.
Choky's busy busy...very good one with Spavleski. Over at the LS thread, some fellas were discussing current fed LS for some time. How 'bout replacing that pot in front of the B1 with some lightnin'?
Steen, I recently ordered from Allied Electronics and is on its way. I need to hear this Lightnin' Stuff soon too.
Blues said:
Choky's busy busy...very good one with Spavleski. Over at the LS thread, some fellas were discussing current fed LS for some time. How 'bout replacing that pot in front of the B1 with some lightnin'?
Steen, I recently ordered from Allied Electronics and is on its way. I need to hear this Lightnin' Stuff soon too.
Now this is a man of my heart We don't want all that waity waity......
spavleski said:Something like this...
Gorgeous. You guys from Serbia has a knack for this, must be something in the water
steenoe said:
Gorgeous. You guys from Serbia has a knack for this, must be something in the water
something in Rakija ..... you mean ...
Hi!
Not knack, gift.
Not water, Beer, my friend Beer!!!!
Regards zeoN_Rider
steenoe said:
Gorgeous. You guys from Serbia has a knack for this, must be something in the water
Not knack, gift.
Not water, Beer, my friend Beer!!!!
Regards zeoN_Rider
Valeriano said:Hi Choky!
congrats! it's a very nice project
will you include one PSMLS pcb for me in the package ??
ciao
Vale
ciao!
why not , if they'll be ready ...... if not , we can always arrange that later .
Zen Mod said:
ciao!
why not , if they'll be ready ...... if not , we can always arrange that later .
super !
it would be very cool to complete a pumpkin with PSMLS ldr attenuator.. oh yes !
sort of the same brand eheh
ciao
Vale
Hi luvdunhill , PCB dimension is 95mm X 120 mm.luvdunhill said:just curious, is that board the same size as any of the boards, for stacking purposes?
Zen Mod said:buffer's supply
Hi Zen Mod,
Very good thread and as you should know the most Dutchies are very poor!
The most I like is your supply. What are the benefits when you compare it with your shunty?
ok, not so hot
Johan
Congrats ZenMod & Spavlesky, very good job.
ZenMod, I wonder you hadn't yet given a name for the shunt reg:
may I suggest "Darky" (no LED's. ).
I (with my usual speed ) am planning to start a shunt-reg battle: Shunty (the more complicated one) vs. Shiny (lm317 in its best shape) vs. TooleReg (sophisticated) vs. Salas Shunt all-FET(http://www.diyaudio.com/forums/showthread.php?postid=1674847#post1674847) vs. Darky (the newborn, simple and cheap)
Mmm, a bunch of little giants good for (2009 )
ZenMod, I wonder you hadn't yet given a name for the shunt reg:
may I suggest "Darky" (no LED's. ).
I (with my usual speed ) am planning to start a shunt-reg battle: Shunty (the more complicated one) vs. Shiny (lm317 in its best shape) vs. TooleReg (sophisticated) vs. Salas Shunt all-FET(http://www.diyaudio.com/forums/showthread.php?postid=1674847#post1674847) vs. Darky (the newborn, simple and cheap)
Mmm, a bunch of little giants good for (2009 )
GuidoR said:Congrats ZenMod & Spavlesky, very good job.
ZenMod, I wonder you hadn't yet given a name for the shunt reg:
may I suggest "Darky" (no LED's. ).
I (with my usual speed ) am planning to start a shunt-reg battle: Shunty (the more complicated one) vs. Shiny (lm317 in its best shape) vs. TooleReg (sophisticated) vs. Salas Shunt all-FET(http://www.diyaudio.com/forums/showthread.php?postid=1674847#post1674847) vs. Darky (the newborn, simple and cheap)
Mmm, a bunch of little giants good for (2009 )
GuidoR, that is a very exciting quest Looking forward for the results. Seems that shuntreg's are taking over this place, (and rightly so).
- Home
- Source & Line
- Analog Line Level
- Poor Serbian Man Optical Volume Control