Well, you guys should settle on a reference design like Earl did. The EconoWave designs floating around in DIY space can't be compared to anything if there's no real comparable data.
In the end we will probably rant about HOMs but first we should be able to discuss basic properties of the systems.
In the end we will probably rant about HOMs but first we should be able to discuss basic properties of the systems.
We're about DIY, not selling a product. I do offer PC boards for $20 a pair, but they're optional, as we have posted the schematics and crossover layout for everyone's use. There are over 80 registered builders with completed projects posted on AudioKarma to date.Well, you guys should settle on a reference design like Earl did.
We are working toward that goal, and I have recently posted a design based upon the Dayton KD trapezoidal enclosure kit ($64 ea. with free US shipping on two at Parts Express). The whole deal comes in under $400 a pair using inexpensive Dayton DC300-8 woofers. Get together with Skywave across the river from you; he's one of the "Collaborators...."I would be willing to build a EconoWave box and measure it along with the Nathans but my reflection free measurement "bubble" is only 1.20–1.40m. That's probably too close.
Last edited:
We're about DIY, not selling a product. I do offer PC boards for $20 a pair, but they're optional, as we have posted the schematics and crossover layout for everyone's use. There are over 80 registered builders with completed projects posted on AudioKarma to date.
Well that's nice but doesn't make those designs better or comparable to others.
We are working toward that goal
Let me know when you're finished. I would like to see a more substantiated discussion.
That'd be your job, to ascertain....Well that's nice but doesn't make those designs better or comparable to others.
Build this with DE250 and Eminence Kappalite drivers. The QSC waveguides have gone up to $12.50 each, alas....
Here's a more refined version, with B&C woofer:
Or Brandon's slick No Quarters:
Here's a more refined version, with B&C woofer:
Or Brandon's slick No Quarters:
Attachments
Last edited:
Just because I can build a speaker doesn't mean I should.
Yes but how do you know if you should if you don't build it?? Kinda hard to get the driver baffle measurements with no baffle.
Rob
Yes but how do you know if you should if you don't build it??
By looking at meaningful data?
Kinda hard to get the driver baffle measurements with no baffle.
I even don't know what the speaker is. There are 80 different ones.
There's ~10,000 posts of data about EconoWave.You're missing the point - where's the data? Just because I can build a speaker doesn't mean I should. Building something just because it's cheap is uhm cheap.
You want horizontal and vertical polars in 7.5° increments out to 90°?
That's on you; we're too busy building and enjoying them....
Last edited:
By looking at meaningful data?
Obviously it was a joke, that said to get meaningful data you still have to build one. No speaker no measurements.
Rob
There's ~10,000 posts of data about EconoWave.
You want horizontal and vertical polars in 7.5° increments out to 90°?
That's on you; we're too busy building and enjoying them....
These kind of speaker projects that get built by a lot of people pop up once in a while. It's mostly based on costs and/or some kind of "me too" effect. Nothing new. I'd love to see a project that is more ambitious.
Obviously it was a joke, that said to get meaningful data you still have to build one. No speaker no measurements.
Rob
Thought the EconoWave was more mature, my bad.
12PS32Which B&C woofer is employed in the second design?
Jackgiff built those from the same PE KDTrap cab kits I show in the top pic. Brandon built his from scratch.The loudspeakers look great!
There have been a couple of shootouts; EconoWave is the value leader that runs with the big dogs....
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- More Vendors...
- GedLee
- New White Paper posting