And now, Federmann, ...Aren't this sharp corners of heatsink little bit painful ? ...
Upupa epops
They are.
4 mm, Federmann, really ? Have you heard sometimes about so called small chain test? Or about test with false finger?
Upupa epops you saw a human finger as 4 millimeters thinner?
Yes Federman, ... My own cases have rounded corners every time....
Upupa Epops why I do not see rounded corners? : D
Ask men, Federmann, which have write this norm...norm tell, that this hole may be only 3 mm...
Upupa epops you are wrong, you have a lot to learn still.
Seriously, ventilation holes 4mm.
For what? For preamp behind front panel? Another ventilation holes on uper panel are insufficient?
Ultra nízko ?umové provedení zesilova?e HQQF-55-506W_ULNIt´s amazing! ... Show that measure please, not only for 0,5W.
Musical signal weakens with increasing frequency. Continuous power is not needed.
M??ení zesilova?e HQQF-55-506W_ULN
Really? It was much different few years ago.
Google Translate
Google Translate
Aldax SPV250 burn at astonish 0,7W/300kHz and HQQF-55-503W-4-2 you measured at 32W/2,5MHz???
Google Translate
Google Translate
Aldax SPV250 burn at astonish 0,7W/300kHz and HQQF-55-503W-4-2 you measured at 32W/2,5MHz???
HQQF-55-503W-4-2 you measured at 32W/2,5MHz???
I refine the bandwidth HQQF
An externally hosted image should be here but it was not working when we last tested it.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Vendor's Bazaar
- Mosfet amp, 5 pairs IRFP240/9240