Yes, it's the only speaker reused from the previous build, don't ask why...
if you dont want them send them to me love 3 ways
I made something similar last year.
ScanSpeak: 6600, 18W, 26W
Phase:
Red:tweeter
Green:mid
Blue:bass
ScanSpeak: 6600, 18W, 26W
Phase:
Red:tweeter
Green:mid
Blue:bass
Attachments
-
Response.jpg128.6 KB · Views: 157
-
Phase.jpg131.8 KB · Views: 132
-
10.jpg388.7 KB · Views: 149
-
IMG_8623-2.jpg234.8 KB · Views: 191
-
AvaScan-Desktop.jpg50 KB · Views: 211
-
5.JPG101.1 KB · Views: 164
-
3.JPG168.8 KB · Views: 174
-
4.JPG90 KB · Views: 207
-
8.JPG207.1 KB · Views: 188
-
6.JPG180.2 KB · Views: 199
Last edited:
I made something similar last year.
ScanSpeak: 6600, 18W, 26W
Phase:
Red:tweeter
Green:mid
Blue:bass
A kind of smaller sisters of mine.Nice amp too...
Speakers in place,time for final show-off.
Attachments
-
Imus-Room A007_resize.jpg521.7 KB · Views: 149
-
Imus-Room A015_resize.jpg596.1 KB · Views: 90
-
Imus-Room A016_resize.jpg506.2 KB · Views: 77
-
Imus-Room A021_resize.jpg361.9 KB · Views: 95
-
Imus-Room A003_resize.jpg406.2 KB · Views: 116
-
Imus-Room A023_resize.jpg346.7 KB · Views: 156
-
Imus-Room A024_resize.jpg338.7 KB · Views: 150
-
Imus-Room A040_resize.jpg508 KB · Views: 124
Looks gorgeous Aircirc! If you don't mind sharing some of your wood craftsmanship skills, could you describe the method on how you cut the side edge angles on the front of the enclosure? I would really like to incorporate that style into my next project but have seen a lot of examples but no guidance on what tools or steps were used to create such a clean angled cut. Thanks!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Imus - 3 way build with ScanSpeak drivers (large)