You have a loop in the signal return via the two power grounds
Read D.Joffe and about the HBRR & HBRL solution.
you have broken the loop. The interference current stops. The noise goes away.Dear when i connect another transformer there is no humming noice coming . please help me if i want to connect one transfomer then what i do .
Read D.Joffe.
No, maintain the three wire power connection from small PSU to pre-amp.Brake the Pre-amp common PS lead and connect it to the COMM Power Amplifier PS input. This should remove the current loop ground.
Duke
Maintain the three wire power connection from big PSU to power amplifier.
Increase the impedance, using the HBRR & HBRL added resistance, to reduce the interference current.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- Humming Noise in my amplifier???